Genuine Polaris Steering Bearing — OEM Part #3514686
Steer with confidence again with a genuine Polaris Steering Bearing. Built for the Polaris ATV or side-by-side, it matches the factory splines, joints and mounting points, so the steering feels tight and works with Polaris EPS where equipped.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 267 Polaris models from 2011 to 2026. See the full fitment list below.
Steering Bearing at a Glance
-
OEM part number: 3514686
-
Brand: Polaris (genuine factory part)
-
Part type: Steering Stem Bearing Kit
-
Fits: ACE single-seat, General crossover side-by-side, RZR sport side-by-side, Ranger utility side-by-side and Sportsman ATV models, 2011–2026
-
Condition: New
Polaris Models and Years This Steering Bearing Fits
Genuine Polaris part #3514686 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 267 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 325 |
2016 |
1 |
| Polaris ACE 500 |
2017–2019 |
1 |
| Polaris ACE 570 |
2016–2019 |
8 |
| Polaris ACE 900 |
2016–2019 |
2 |
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2024–2026 |
4 |
| Polaris General XP |
2024–2026 |
7 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2025 |
1 |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 570 |
2019–2020 |
2 |
| Polaris RZR 900 |
2018–2026 |
10 |
| Polaris RZR 1000 |
2018–2021 |
4 |
| Polaris RZR PRO |
2020–2026 |
23 |
| Polaris RZR RS1 |
2019–2022 |
3 |
| Polaris RZR S |
2020 |
1 |
| Polaris RZR S4 |
2020 |
1 |
| Polaris RZR Trail |
2020–2026 |
8 |
| Polaris RZR Trctr |
2025 |
1 |
| Polaris RZR Turbo |
2020–2024 |
9 |
| Polaris RZR XP |
2019–2026 |
29 |
| Polaris RZR Xp4 |
2019 |
2 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2020, 2023 |
2 |
| Polaris Ranger 4x4 |
2011 |
2 |
| Polaris Ranger 6P |
2017 |
1 |
| Polaris Ranger 6x6 |
2011–2013 |
2 |
| Polaris Ranger 500 |
2026 |
1 |
| Polaris Ranger 530 |
2023–2025 |
1 |
| Polaris Ranger 570 |
2015–2026 |
23 |
| Polaris Ranger 800 |
2012–2017 |
6 |
| Polaris Ranger 900 |
2011–2019 |
11 |
| Polaris Ranger 1000 |
2017–2018, 2020–2026 |
50 |
| Polaris Ranger Diesel |
2014, 2025 |
4 |
| Polaris Ranger EV |
2023–2024 |
2 |
| Polaris Ranger Hst |
2015 |
1 |
| Polaris Ranger MD |
2018, 2025 |
2 |
| Polaris Ranger MS |
2025–2026 |
2 |
| Polaris Ranger Northstar |
2020 |
2 |
| Polaris Ranger RC |
2020 |
1 |
| Polaris Ranger SP |
2026 |
1 |
| Polaris Ranger Tx |
2020 |
1 |
| Polaris Ranger Xd |
2024 |
2 |
| Polaris Ranger XP |
2012, 2014, 2017–2018, 2021–2026 |
27 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman ACE |
2014–2015 |
5 |
Why Choose a Genuine Polaris OEM Steering Bearing?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Polaris EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM steering part, part #3514686
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Polaris models
- Works with factory power steering units, sensors and wiring where applicable
Materials and Construction
Polaris steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed power steering motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing power steering faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Steering Bearing Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a power steering warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Polaris parts diagram for hardware, cotter pins and power steering connectors.
- Disconnect the battery before working on power steering parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #3514686 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Steering Bearing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Steering Bearing?
The genuine Polaris part number is 3514686. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3514686 fit?
It fits 267 Polaris ACE, General, RZR, Ranger and Sportsman models from 2011 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does power steering need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Polaris Steering Bearing Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Steering Bearing, OEM part #3514686, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.