Indian Battery Box Pad 5815369

Genuine Indian Battery Box Pad — OEM Part #5815369

Fix electrical gremlins the right way with the genuine Indian Battery Box Pad, part #5815369. It is the factory electrical part for the Indian Scout Bobber, FTR and other models.

The electrical system powers ignition, fuel injection, lighting and accessories. Bad connections or failed modules cause no-starts and strange faults. This part is confirmed for 23 Indian models from 2023 to 2026. See the full fitment list below.

Indian Battery Box Pad at a Glance

• OEM part number: 5815369
• Brand: Indian Motorcycle (genuine OEM part)
• Part type: Battery Mounting
• Fits: Indian Scout and FTR models, 2023–2026
• Condition: New

Indian Models and Years This Battery Box Pad Fits

Genuine Indian part #5815369 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.

Indian Scout Fitment

Indian FTR Fitment

Why Choose a Genuine Indian OEM Battery Box Pad?

• Plug-and-play connectors for the factory harness
• Correct circuits and resistance values
• Reliable starts and charging
• Avoids the problems of universal wiring
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing

Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.

Features and Materials

Key Features

• Genuine Indian Motorcycle OEM part #5815369
• Factory connectors and routing
• Weather-sealed terminals
• Direct replacement for the listed models

Materials and Construction

Indian electrical parts use automotive-grade copper wire, sealed connectors, heat-resistant insulation and molded switch housings.

Common Reasons Riders Replace This Part

• Fixing no-start or intermittent electrical faults
• Replacing chafed or melted wiring
• Replacing failed switches, sensors or modules
• Repairs after a tip-over or water damage

Signs Your Battery Box Pad Needs Replacing

• No start or intermittent power
• Blown fuses or dead circuits
• Warning lights on the dash
• Melted or corroded connectors

Installation Tips

1. Disconnect the battery negative cable first.
2. Photograph the routing of the old part before removing it.
3. Install the new part, matching the original routing and clips.
4. Apply dielectric grease to connectors to keep out moisture.
5. Reconnect the battery and test the circuit before riding.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Indian Parts Diagrams for This Part

Browse all Indian motorcycle parts diagrams to find part #5815369 for your model.

Related Indian OEM Parts

Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:

• Indian Battery Tray (#5269894)
• Indian Battery Tray Right (#5459684)
• Indian Battery Hold Down Strap (#5262860)
• Indian Battery Box Pad, Front (#5814831)
• Indian Battery Floor Plate (#1028684)
• Indian Rubber Pad (#5815613)

Recommended Accessories and Maintenance Supplies

Pair your Battery Box Pad with these parts and supplies:

• BS Battery for Indian — Sealed AGM and lithium batteries
• Indian stators and regulators — Stators, rectifiers, regulators and sensors
• Indian ignition parts — Coils, plug wires and ignition parts
• NGK spark plugs — Spark plugs for Indian V-twins
• Indian OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Victory & Indian Motorcycle Maintenance Checklist
• How to Prepare Your Motorcycle for Winter Storage.
• Beware of Victory & Indian Motorcycle Parts Scams on Facebook!
• Tips on Planning Your 2025 Spring and Summer Motorcycle Adventure

Frequently Asked Questions

What is the OEM part number for this Indian Battery Box Pad?

The genuine Indian Motorcycle part number is 5815369. Use it to match this part to your factory parts diagram.

Which Indian models does part #5815369 fit?

It fits 23 Indian models from 2023 to 2026. See the fitment tables above for every model and year.

Is this a genuine Indian Motorcycle part?

Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.

How do I make sure this fits my bike?

Match part #5815369 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.

Do I need to program a new module?

Some control modules and keys need setup with a dealer tool. Check the service manual for your model.

How do I find an electrical fault?

Check the battery, fuses and grounds first, then use the wiring diagram in the service manual.

Does this include connectors?

OEM harness parts include the factory connectors shown in the parts diagram.

Order Your Genuine Indian Battery Box Pad Today

Ride with confidence on parts made for your bike. Order the genuine Indian Battery Box Pad, OEM part #5815369, from Witchdoctors today and keep your Indian Scout Bobber, FTR and other models running the way Indian designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Needles Highway and Custer State Park Scenic Drives — Black Hills, South Dakota: granite spires, tunnels and pigtail bridges
• San Juan Skyway and Million Dollar Highway (US 550) — southwest Colorado: a 236-mile loop over high mountain passes