Genuine Polaris Clevis Pin — OEM Part #7661037
Stop with confidence with a genuine Polaris Clevis Pin. Built for the Polaris ATV or side-by-side, it fits the factory calipers, lines and mounts, so pedal or lever feel and stopping power return to factory standard.
Lines, calipers, master cylinders, pads, rotors and parking brakes work as one hydraulic and mechanical system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 74 Polaris models from 1999 to 2026. See the full fitment list below.
Clevis Pin at a Glance
-
OEM part number: 7661037
-
Brand: Polaris (genuine factory part)
-
Part type: Parking Brakes & Components
-
Fits: Ranger utility side-by-side and Series 10/11 ATV models, 1999–2026
-
Condition: New
Polaris Models and Years This Clevis Pin Fits
Genuine Polaris part #7661037 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 74 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
1999, 2003 |
2 |
| Polaris Ranger 2x4 |
2004–2005 |
1 |
| Polaris Ranger 4x4 |
2004–2005 |
1 |
| Polaris Ranger 6x6 |
2004–2006 |
2 |
| Polaris Ranger 500 |
2003, 2006 |
3 |
| Polaris Ranger 700 |
2006 |
1 |
| Polaris Ranger 902 |
2019–2022 |
1 |
| Polaris Ranger 902D |
2020–2022 |
3 |
| Polaris Ranger 1000 |
2018, 2020–2026 |
16 |
| Polaris Ranger Diesel |
2020, 2022–2026 |
10 |
| Polaris Ranger EV |
2024 |
4 |
| Polaris Ranger HD |
2020 |
1 |
| Polaris Ranger Intl |
2018 |
1 |
| Polaris Ranger Is |
2020 |
1 |
| Polaris Ranger SP |
2026 |
1 |
| Polaris Ranger Tm |
2004–2006 |
1 |
| Polaris Ranger XP |
2005, 2018–2019, 2021–2026 |
22 |
Polaris Series 10/11 ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Series 11 |
2003 |
3 |
Why Choose a Genuine Polaris OEM Clevis Pin?
- Factory hydraulic specification for proper feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM brake part, part #7661037
- Original fittings, banjo bolts and mounting points
- Built to Polaris's brake system specification
- Designed for mud, water and steep terrain
- Works with the DOT fluid specified in your manual
Materials and Construction
Polaris brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with DOT-compatible seals, and steel rotors and friction pads designed for off-road use.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Clevis Pin Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that will not hold on a slope
Installation Tips
- Use the Polaris parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7661037 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Clevis Pin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Clevis Pin?
The genuine Polaris part number is 7661037. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7661037 fit?
It fits 74 Polaris Ranger and Series models from 1999 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Polaris owner's manual or on the reservoir cap. Never mix DOT 5 silicone with DOT 3, 4 or 5.1.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors with pads?
Not always. Measure thickness and check for scoring or warping against the minimum spec.
Order Your Genuine Polaris Clevis Pin Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Clevis Pin, OEM part #7661037, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.