Genuine Polaris Pivot Pin and Ring Snap — OEM Part #2203059
Nothing matters more on a steep descent than brakes you can trust. The genuine Polaris Pivot Pin and Ring Snap restores factory braking on your Polaris ATV or side-by-side, matching the original fittings, dimensions and hydraulic specification.
Lines, calipers, master cylinders, pads, rotors and parking brakes work as one hydraulic and mechanical system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 222 Polaris models from 2006 to 2026. See the full fitment list below.
Pivot Pin and Ring Snap at a Glance
-
OEM part number: 2203059
-
Brand: Polaris (genuine factory part)
-
Part type: Master Cylinders & Components
-
Fits: Farmhand utility vehicle, Hawkeye ATV, other Polaris, Scrambler ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2006–2026
-
Condition: New
Polaris Models and Years This Pivot Pin and Ring Snap Fits
Genuine Polaris part #2203059 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 222 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye |
2006–2007 |
1 |
| Polaris Hawkeye 2x4 |
2008, 2011 |
1 |
| Polaris Hawkeye 300 |
2009–2010 |
1 |
| Polaris Hawkeye 325 |
2015 |
1 |
| Polaris Hawkeye 400 |
2011–2013 |
2 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Polaris |
2015 |
1 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 500 |
2010–2012 |
1 |
| Polaris Scrambler 850 |
2013–2026 |
6 |
| Polaris Scrambler 1000 |
2014–2019 |
4 |
| Polaris Scrambler HO |
2013 |
1 |
| Polaris Scrambler XP |
2014–2018, 2020–2021 |
6 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
5 |
| Polaris Sportsman 48" |
2020 |
1 |
| Polaris Sportsman 300 |
2008–2010 |
1 |
| Polaris Sportsman 400 |
2008–2014 |
2 |
| Polaris Sportsman 450 |
2007, 2016–2026 |
12 |
| Polaris Sportsman 500 |
2007–2013 |
6 |
| Polaris Sportsman 550 |
2010–2014 |
3 |
| Polaris Sportsman 570 |
2014–2026 |
61 |
| Polaris Sportsman 700 |
2007 |
1 |
| Polaris Sportsman 800 |
2007–2014 |
4 |
| Polaris Sportsman 850 |
2014–2026 |
15 |
| Polaris Sportsman 1000 |
2015–2019, 2025–2026 |
6 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman ETX |
2015 |
2 |
| Polaris Sportsman Forest |
2011–2012 |
6 |
| Polaris Sportsman Touring |
2008–2026 |
31 |
| Polaris Sportsman X2 |
2006–2014, 2019 |
10 |
| Polaris Sportsman XP |
2009–2026 |
26 |
Polaris Trail Blazer ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Blazer 330 |
2010–2013 |
1 |
Polaris Trail Boss ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Boss 330 |
2010–2013 |
2 |
Why Choose a Genuine Polaris OEM Pivot Pin and Ring Snap?
- Factory hydraulic specification for proper feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM brake part, part #2203059
- Original fittings, banjo bolts and mounting points
- Built to Polaris's brake system specification
- Designed for mud, water and steep terrain
- Works with the DOT fluid specified in your manual
Materials and Construction
Polaris brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with DOT-compatible seals, and steel rotors and friction pads designed for off-road use.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Pivot Pin and Ring Snap Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that will not hold on a slope
Installation Tips
- Use the Polaris parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #2203059 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Pivot Pin and Ring Snap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Pivot Pin and Ring Snap?
The genuine Polaris part number is 2203059. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2203059 fit?
It fits 222 Polaris Farmhand, Hawkeye, Scrambler, Sportsman, Trail Blazer and Trail Boss models from 2006 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Polaris owner's manual or on the reservoir cap. Never mix DOT 5 silicone with DOT 3, 4 or 5.1.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors with pads?
Not always. Measure thickness and check for scoring or warping against the minimum spec.
Order Your Genuine Polaris Pivot Pin and Ring Snap Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Pivot Pin and Ring Snap (part #2203059) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.