Genuine Polaris Pinion — OEM Part #3070336
Restore reliable power and electronics with a genuine Polaris Pinion. Built for the Ranger 900 or Ranger Diesel, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 12 Polaris models from 2011 to 2014. See the full fitment list below.
Pinion at a Glance
-
OEM part number: 3070336
-
Brand: Polaris (genuine factory part)
-
Part type: Starter Components
-
Fits: Ranger utility side-by-side models, 2011–2014
-
Condition: New
Polaris Models and Years This Pinion Fits
Genuine Polaris part #3070336 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 900 4x4 D |
2011 |
| Polaris Ranger 900 4x4 D Hippo Mps |
2014 |
| Polaris Ranger 900 4x4 Diesel Crew |
2012 |
| Polaris Ranger 900 Diesel |
2012–2014 |
| Polaris Ranger 900 Hippo |
2014 |
| Polaris Ranger Crew 900 Diesel |
2013–2014 |
| Polaris Ranger Crew Diesel |
2014 |
| Polaris Ranger Diesel |
2011–2013 |
| Polaris Ranger Diesel Deluxe |
2014 |
| Polaris Ranger Diesel Hst |
2014 |
| Polaris Ranger Diesel Hst Deluxe |
2014 |
| Polaris Ranger Diesel Intl |
2014 |
Why Choose a Genuine Polaris OEM Pinion?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #3070336
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Pinion Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Pinion with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Pinion?
The genuine Polaris part number is 3070336. Use it to match this part to your factory parts diagram.
Which Polaris models does part #3070336 fit?
It fits 12 Polaris Ranger models from 2011 to 2014. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Pinion Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Pinion, OEM part #3070336, from Witchdoctors today and keep your Ranger 900 or Ranger Diesel running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.