Genuine Polaris Frame Plug — OEM Part #5810467
Keep the cab on your Polaris ATV or side-by-side tight, quiet and weather-resistant with a genuine Polaris Frame Plug. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 30 Polaris models from 2002 to 2014. See the full fitment list below.
Frame Plug at a Glance
-
OEM part number: 5810467
-
Brand: Polaris (genuine factory part)
-
Part type: Cab Frame
-
Fits: ATP ATV, Polaris ATV, Hawkeye ATV, Magnum ATV, Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2002–2014
-
Condition: New
Polaris Models and Years This Frame Plug Fits
Genuine Polaris part #5810467 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris ATP ATV Fitment
| Model |
Model Years |
| Polaris Atp 330 4x4 |
2004–2005 |
| Polaris Atp 500 4x4 |
2004–2005 |
Polaris Polaris ATV Fitment
| Model |
Model Years |
| Polaris ATV PRO 500 4x4 |
2002 |
Polaris Hawkeye ATV Fitment
| Model |
Model Years |
| Polaris Hawkeye 400 HO 2x4 |
2011–2013 |
| Polaris Hawkeye 400 HO 2x4 HD |
2013 |
Polaris Magnum ATV Fitment
| Model |
Model Years |
| Polaris Magnum 330 2x4 |
2003–2005 |
| Polaris Magnum 330 4x4 |
2003–2006 |
| Polaris Magnum 500 4x4 Hds |
2003 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 700 Commercial EFI 6x6 |
2002 |
Polaris Scrambler ATV Fitment
| Model |
Model Years |
| Polaris Scrambler 2x4 (International) |
2008–2009 |
| Polaris Scrambler 500 4x4 |
2008, 2010–2012 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 10 Ptv 4x4 |
2003 |
| Polaris Series 10 Ptv 6x6 |
2003 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 6x6 |
2003–2008 |
| Polaris Sportsman 400 |
2003–2005 |
| Polaris Sportsman 400 HO |
2014 |
| Polaris Sportsman 400 HO 4x4 |
2011–2013 |
| Polaris Sportsman 450 |
2006–2007 |
| Polaris Sportsman 500 |
2004 |
| Polaris Sportsman 500 HD (International) |
2013 |
| Polaris Sportsman 500 HO |
2003, 2005–2006, 2008–2013 |
| Polaris Sportsman 600 |
2004 |
| Polaris Sportsman 700 |
2004 |
| Polaris Sportsman Forest 500 |
2011–2012 |
Polaris Trail Blazer ATV Fitment
| Model |
Model Years |
| Polaris Trail Blazer |
2004–2006 |
| Polaris Trail Blazer 250 |
2003 |
| Polaris Trail Blazer 330 |
2008, 2010–2013 |
| Polaris Trail Blazer 400 |
2003 |
Polaris Trail Boss ATV Fitment
| Model |
Model Years |
| Polaris Trail Boss 330 |
2003–2013 |
| Polaris Trail Boss 330 Intl |
2010–2012 |
Why Choose a Genuine Polaris OEM Frame Plug?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cab part, part #5810467
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Polaris cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Frame Plug Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Polaris parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Frame Plug with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Frame Plug?
The genuine Polaris part number is 5810467. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5810467 fit?
It fits 30 Polaris ATP, ATV, Hawkeye, Magnum, Ranger, Scrambler, Series, Sportsman, Trail Blazer and Trail Boss models from 2002 to 2014. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Polaris cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Polaris Frame Plug Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Frame Plug, OEM part #5810467, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.