Genuine Polaris Trap Plug — OEM Part #5432377
Breathe easy with a genuine Polaris Trap Plug. Designed for the Polaris ATV or side-by-side, it fits the original airbox, ducts and clamps for a tight seal and the airflow your engine was calibrated for.
The intake path, from inlet to airbox to throttle body, has to stay sealed. One cracked boot or warped lid can let in enough dust to wear out an engine fast. This part is confirmed for 25 Polaris models from 2002 to 2009. See the full fitment list below.
Trap Plug at a Glance
-
OEM part number: 5432377
-
Brand: Polaris (genuine factory part)
-
Part type: Airbox Components
-
Fits: ATP ATV, Polaris ATV, Magnum ATV, Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV and Trail Boss ATV models, 2002–2009
-
Condition: New
Polaris Models and Years This Trap Plug Fits
Genuine Polaris part #5432377 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris ATP ATV Fitment
| Model |
Model Years |
| Polaris Atp 330 4x4 |
2004–2005 |
| Polaris Atp 500 4x4 |
2004–2005 |
Polaris Polaris ATV Fitment
| Model |
Model Years |
| Polaris ATV PRO 500 4x4 |
2002 |
Polaris Magnum ATV Fitment
| Model |
Model Years |
| Polaris Magnum 330 2x4 |
2003–2005 |
| Polaris Magnum 330 4x4 |
2003, 2006 |
| Polaris Magnum 500 4x4 Hds |
2003 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 700 Commercial EFI 6x6 |
2002 |
Polaris Scrambler ATV Fitment
| Model |
Model Years |
| Polaris Scrambler 500 4x4 |
2003–2007 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 10 Ptv 4x4 |
2003 |
| Polaris Series 10 Ptv 6x6 |
2003 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 6x6 |
2003–2007 |
| Polaris Sportsman 400 |
2003–2005 |
| Polaris Sportsman 450 |
2006–2007 |
| Polaris Sportsman 500 |
2004 |
| Polaris Sportsman 500 EFI |
2006–2007 |
| Polaris Sportsman 500 HO |
2003, 2005–2006 |
| Polaris Sportsman 600 |
2003–2005 |
| Polaris Sportsman 700 |
2003–2006 |
| Polaris Sportsman 700 EFI |
2005–2006 |
| Polaris Sportsman 800 EFI |
2005–2007 |
| Polaris Sportsman Mv7 |
2005 |
| Polaris Sportsman Touring 800 EFI |
2008–2009 |
| Polaris Sportsman X2 |
2006 |
| Polaris Sportsman X2 800 EFI |
2007 |
Polaris Trail Boss ATV Fitment
| Model |
Model Years |
| Polaris Trail Boss 330 |
2003–2008 |
Why Choose a Genuine Polaris OEM Trap Plug?
- Factory seal against dust, water and debris
- Correct airflow for the factory fuel and ignition mapping
- Direct fit with original clamps, ducts and mounts
- Helps prevent premature engine wear
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM intake part, part #5432377
- Molded to original airbox and duct dimensions
- Heat- and fuel-vapor-resistant materials
- Designed for dusty, muddy and wet riding
- Works with factory air filters and sensors
Materials and Construction
Polaris intake parts use rigid, heat-stable plastics for airbox housings and lids, flexible rubber or TPE boots and ducts that seal under vibration, and filter media designed to trap fine dust while keeping airflow.
Common Reasons Riders Replace This Part
- Replacing a cracked airbox, lid or intake boot
- Restoring the seal after water or mud intrusion
- Routine filter and wear-item replacement
- Fixing idle and performance problems from an air leak
Signs Your Trap Plug Needs Replacing
- Dust on the clean side of the air filter
- Cracks or splits in boots, ducts or the airbox
- Rough idle, hesitation or a lean condition
- Whistling or sucking noises from the intake
- Water in the airbox after a crossing
Installation Tips
- Check the Polaris parts diagram for clamps, seals and duct routing.
- Remove the old part and clean dust from the airbox and throttle body inlet.
- Install the new part, making sure every edge seals.
- Tighten clamps evenly without overtightening plastic fittings.
- Start the engine and check for air leaks and a smooth idle.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Trap Plug with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Trap Plug?
The genuine Polaris part number is 5432377. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5432377 fit?
It fits 25 Polaris ATP, ATV, Magnum, Ranger, Scrambler, Series, Sportsman and Trail Boss models from 2002 to 2009. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
How often should I check my air filter?
After every dusty ride if possible, and replace it at the interval in your owner's manual or sooner.
Can an intake leak damage my engine?
Yes. Unfiltered air carries fine dust that wears pistons, rings and cylinders quickly.
Will this change performance?
It restores factory airflow and sealing. If you had a leak, expect a smoother idle and better response.
Order Your Genuine Polaris Trap Plug Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Trap Plug, OEM part #5432377, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more
-
Spearhead Trails — southwest Virginia: a multi-trail system across the Virginia coalfields