Stop with confidence on Polaris Sportsman, Magnum & Scrambler with the DP Brakes Sintered Rear Brake Pads DP932 for Polaris Sportsman, Magnum & Scrambler. Fresh, quality friction material is the single biggest upgrade you can make to your brakes.
DP Brakes has made sintered brake pads, shoes and clutch components for powersports for decades. Witchdoctors stocks genuine DP Brakes parts by part number.
Why Choose the DP Brakes Sintered Rear Brake Pads DP932 for Polaris Sportsman, Magnum & Scrambler
DP sintered ATV and UTV pads are built for mud, water, dust and long downhills. The sintered metal compound outlasts organic and aramid pads, works the same wet or dry, and a ceramic layer on the backplate keeps heat away from the caliper and fluid.
Key Features
- GG-friction rated sintered metal compound
- Quick break-in for full performance fast
- Consistent, hard, fade-free stops
- Outlasts organic and aramid fiber pads
- Equal performance in wet or dry conditions
- Aluminum oxide ceramic layer on the backplate keeps heat away from the caliper piston and fluid
Specifications
-
Brand: DP Brakes
-
Part number: DP932
-
Compound: Sintered
-
Position: Rear
Specifications are from DP Brakes and catalog listings (verify before ordering).
Fitment
Per catalog listings (verify before ordering):
- Polaris Sportsman 400-800 2002-2010, Magnum 325/330/500 2002-2006, Scrambler 500 2005-2011, Trail Boss 330 2005-2011, Predator 500 2006-2008
Confirm your year, model and brake position (front, rear, left or right) before ordering.
How to Choose
- Match the part number to your exact model, year and brake position.
- Replace pads in axle sets: both sides of a dual-rotor front need two sets.
- Inspect rotors for minimum thickness and scoring while you’re in there.
- Sintered pads are the best choice for mud, water and dust.
Installation
- Support the vehicle safely and remove the wheel if needed for access.
- Remove the caliper or pad pins and take out the old pads.
- Push the pistons back slowly and check the brake fluid level so it doesn’t overflow.
- Clean the caliper and pins, install the new pads and any clips or shims.
- Pump the brake until the lever or pedal is firm before moving the vehicle.
- Bed the pads in with several moderate stops.
Follow your service manual and torque specs. Brakes are safety-critical; if you’re not sure, have a qualified technician do the job.
Care and Maintenance
- Check pad or lining thickness regularly and before long rides.
- Rinse mud and grit from the brakes after wet rides.
- Change brake fluid at your manual’s interval.
Related DP Brakes Parts
Shop all DP Brakes parts, UTV brake pads, brakes and rotors, brake lines and brake cleaner.
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Is this a genuine DP Brakes part?
Yes. Witchdoctors sells genuine DP Brakes parts by part number.
Is this a set for one caliper?
Brake pads are sold as a set for one caliper. Dual-rotor fronts need two sets.
Do I need to bed them in?
A few moderate stops will bed them in quickly.
Can I return it?
Contact our customer service team before installing, and we’ll help under our return policy.
Where to Ride
Brakes sorted? Take it out to one of these off-road destinations:
Order the DP Brakes Sintered Rear Brake Pads DP932 for Polaris Sportsman, Magnum & Scrambler Today
Add the DP Brakes Sintered Rear Brake Pads DP932 for Polaris Sportsman, Magnum & Scrambler to your cart, and Witchdoctors will get it moving. Not sure it fits? Contact our team, and we’ll help.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.