Victory Relay, 12V, 20A WD-4016186

Genuine Victory Relay, 12V, 20A — OEM Part #WD-4016186

Fix electrical gremlins the right way with the genuine Victory Victory Relay, 12V, 20A, Polaris part #WD-4016186. It is the factory electrical part for the Victory Cross Country, Cross Country Tour and other models.

The electrical system powers ignition, fuel injection, lighting and accessories. Bad connections or failed modules cause no-starts and strange faults. This part is confirmed for 7 Victory models from 2017. See the full fitment list below.

Victory Relay, 12V, 20A at a Glance

• OEM part number: WD-4016186
• Brand: Victory Motorcycles (genuine Polaris OEM part)
• Part type: Fuse, Circuit Breaker & Relay
• Fits: Victory Bagger and Touring and Cruiser models, 2017
• Condition: New

Victory Models and Years This Relay, 12V, 20A Fits

Genuine Victory part #WD-4016186 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Bagger and Touring Fitment

Victory Cruiser Fitment

Why Choose a Genuine Victory OEM Relay, 12V, 20A?

• Plug-and-play connectors for the factory harness
• Correct circuits and resistance values
• Reliable starts and charging
• Avoids the problems of universal wiring
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

• Genuine Polaris/Victory OEM part #WD-4016186
• Factory connectors and routing
• Weather-sealed terminals
• Direct replacement for the listed models

Materials and Construction

Victory electrical parts use automotive-grade copper wire, sealed connectors, heat-resistant insulation and molded switch housings.

Common Reasons Riders Replace This Part

• Fixing no-start or intermittent electrical faults
• Replacing chafed or melted wiring
• Replacing failed switches, sensors or modules
• Repairs after a tip-over or water damage

Signs Your Relay, 12V, 20A Needs Replacing

• No start or intermittent power
• Blown fuses or dead circuits
• Warning lights on the dash
• Melted or corroded connectors

Installation Tips

1. Disconnect the battery negative cable first.
2. Photograph the routing of the old part before removing it.
3. Install the new part, matching the original routing and clips.
4. Apply dielectric grease to connectors to keep out moisture.
5. Reconnect the battery and test the circuit before riding.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #WD-4016186 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2017 Victory Cross Country parts diagrams
• 2017 Victory Cross Country Tour parts diagrams
• 2017 Victory Gunner parts diagrams
• 2017 Victory Hammer parts diagrams
• 2017 Victory High-Ball parts diagrams
• 2017 Victory Judge parts diagrams
• 2017 Victory Vegas parts diagrams

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

• Victory Relay, 12V, 20A (#4016186)
• Victory Circuit Breaker, 40 Amp (#2410332)
• Victory Relay (#4011828)
• Victory Circuit Breaker 40 Amp Marine Grade Complete Kit (#WD-40AKIT)
• Victory Circuit Breaker 40 Amp Marine Grade W/ Nuts (#WD-2410332)

Recommended Accessories and Maintenance Supplies

Pair your Relay, 12V, 20A with these parts and supplies:

• BS Battery for Victory — Sealed AGM and lithium batteries
• Victory stators and regulators — Stators, rectifiers, regulators and sensors
• Custom Dynamics LED lighting — LED turn signals, brake lights and accent lighting
• Victory maintenance essentials — Filters, plugs, fluids and wear items
• Victory OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Victory Motorcycle Wheel Speed Sensor: Signs & Replacement
• Victory & Indian Motorcycle Maintenance Checklist
• Can You Still Get Parts for Victory Motorcycles?
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride!

Frequently Asked Questions

What is the OEM part number for this Victory Relay, 12V, 20A?

The genuine Polaris/Victory part number is WD-4016186. Use it to match this part to your factory parts diagram.

Which Victory models does part #WD-4016186 fit?

It fits the Cross Country (2017); Cross Country Tour (2017); Gunner (2017); Hammer (2017); High-Ball (2017); Judge (2017); Vegas (2017).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

Do I need to program a new module?

Some control modules and keys need setup with a dealer tool. Check the service manual for your model.

How do I find an electrical fault?

Check the battery, fuses and grounds first, then use the wiring diagram in the service manual.

Does this include connectors?

OEM harness parts include the factory connectors shown in the parts diagram.

Order Your Genuine Victory Relay, 12V, 20A Today

Ride with confidence on parts made for your bike. Order the genuine Victory Relay, 12V, 20A, OEM part #WD-4016186, from Witchdoctors today and keep your Victory Cross Country, Cross Country Tour and other models running the way Victory designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts
• Victory motorcycle parts guide

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Beartooth Highway — Montana and Wyoming: switchbacks to nearly 11,000 feet near Yellowstone
• Natchez Trace Parkway — Mississippi, Alabama and Tennessee: 444 miles of low-traffic, history-filled parkway