Genuine Victory Reservoir — OEM Part #1930882-USED
Stop with confidence using the genuine Victory Victory Reservoir, Polaris part #1930882-USED. It is the factory brake part for the Victory V92TC Touring Cruiser, V92SC SportCruiser and other models.
Brakes are the most important safety system on your Victory. Calipers, masters, lines and pedals must be exact to give firm, predictable stopping power. This part is confirmed for 8 Victory models from 1999 to 2007. See the full fitment list below.
Availability note: Polaris lists this part as discontinued or no longer available. Stock may be limited. See what to do when a part is no longer available or browse hard-to-find Victory parts.
Victory Reservoir at a Glance
-
OEM part number: 1930882-USED
-
Brand: Victory Motorcycles (genuine Polaris OEM part)
-
Part type: Master Cylinder
-
Fits: Victory Cruiser and V92 Classic models, 1999–2007
-
Condition: Used genuine OEM (factory take-off)
Victory Models and Years This Reservoir Fits
Genuine Victory part #1930882-USED fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.
Victory Cruiser Fitment
| Model |
Model Years |
| Victory Vegas |
2003–2004, 2006–2007 |
| Victory Kingpin |
2004–2007 |
| Victory Hammer |
2005–2007 |
| Victory Jackpot |
2006–2007 |
Victory V92 Classic Fitment
| Model |
Model Years |
| Victory V92SC SportCruiser |
1999–2002 |
| Victory V92TC Touring Cruiser |
2001–2006 |
| Victory V92C |
2002 |
| Victory V92C Classic Cruiser |
2003 |
Why Choose a Genuine Victory OEM Reservoir?
- Factory pedal and lever feel
- Correct fit for the original calipers and rotors
- Works with the factory ABS where equipped
- Safety you can trust on a heavy cruiser or bagger
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing
Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.
Features and Materials
Key Features
- Genuine Polaris/Victory OEM part #1930882-USED
- Matches original mounting and fittings
- Built for the weight and speed of a Victory
- Direct replacement for the listed models
Materials and Construction
Victory brake parts use cast aluminum calipers and master cylinders, stainless or reinforced brake lines, stainless rotors and forged or cast pedals.
Common Reasons Riders Replace This Part
- Brake system rebuilds
- Fixing a soft or spongy lever or pedal
- Replacing damaged lines or hardware
- Repairs after a tip-over
Signs Your Reservoir Needs Replacing
- Soft or spongy brake feel
- Fluid leaks at the caliper, master or lines
- Grinding or squealing when braking
- Bent pedal or damaged lever
Installation Tips
- Protect painted parts from brake fluid.
- Install the new part with new crush washers on banjo fittings.
- Fill with fresh DOT fluid of the type marked on the master cylinder cap.
- Bleed the system until the lever or pedal is firm, following the ABS procedure if equipped.
- Test the brakes at low speed before riding normally.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Victory Parts Diagrams for This Part
Find part #1930882-USED in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Victory OEM Parts
Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Reservoir with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Reservoir?
The genuine Polaris/Victory part number is 1930882-USED. Use it to match this part to your factory parts diagram.
Which Victory models does part #1930882-USED fit?
It fits the V92SC SportCruiser (1999–2002); V92TC Touring Cruiser (2001–2006); V92C (2002); V92C Classic Cruiser (2003); Vegas (2003–2004, 2006–2007); Kingpin (2004–2007); Hammer (2005–2007); Jackpot (2006–2007).
Is this a genuine Victory part?
Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.
Is this part new?
No. This is a used genuine OEM part (factory take-off). It is sold as described in the title and photos.
Can I still get parts for my Victory?
Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.
What brake fluid does my Victory use?
Use the DOT type printed on the master cylinder cap, usually DOT 4. Do not mix types.
Do I need to bleed an ABS Victory differently?
Some ABS models need a specific procedure. Check the service manual for your model.
Should I replace pads at the same time?
If pads are near the wear limit, replace them while the brake system is open.
Order Your Genuine Victory Reservoir Today
Ride with confidence on parts made for your bike. Order the genuine Victory Reservoir, OEM part #1930882-USED, from Witchdoctors today and keep your Victory V92TC Touring Cruiser, V92SC SportCruiser and other models running the way Victory designed it.
Where to Ride Your Victory
Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.