Genuine Victory Rear Master Cylinder, Brake — OEM Part #1910620
Stop with confidence using the genuine Victory Victory Rear Master Cylinder, Brake, Polaris part #1910620. It is the factory brake part for the Victory Vegas, Kingpin and other cruiser models.
Brakes are the most important safety system on your Victory. Calipers, masters, lines and pedals must be exact to give firm, predictable stopping power. This part is confirmed for 4 Victory models from 2003 to 2007. See the full fitment list below.
Availability note: Polaris lists this part as discontinued or no longer available. Stock may be limited. See what to do when a part is no longer available or browse hard-to-find Victory parts.
Victory Rear Master Cylinder, Brake at a Glance
-
OEM part number: 1910620
-
Brand: Victory Motorcycles (genuine Polaris OEM part)
-
Part type: Master Cylinder
-
Fits: Victory Cruiser models, 2003–2007
-
Condition: New
Victory Models and Years This Rear Master Cylinder, Brake Fits
Genuine Victory part #1910620 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.
Victory Cruiser Fitment
| Model |
Model Years |
| Victory Vegas |
2003–2007 |
| Victory Kingpin |
2004–2007 |
| Victory Hammer |
2005–2007 |
| Victory Jackpot |
2006–2007 |
Why Choose a Genuine Victory OEM Rear Master Cylinder, Brake?
- Factory pedal and lever feel
- Correct fit for the original calipers and rotors
- Works with the factory ABS where equipped
- Safety you can trust on a heavy cruiser or bagger
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing
Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.
Features and Materials
Key Features
- Genuine Polaris/Victory OEM part #1910620
- Matches original mounting and fittings
- Built for the weight and speed of a Victory
- Direct replacement for the listed models
Materials and Construction
Victory brake parts use cast aluminum calipers and master cylinders, stainless or reinforced brake lines, stainless rotors and forged or cast pedals.
Common Reasons Riders Replace This Part
- Brake system rebuilds
- Fixing a soft or spongy lever or pedal
- Replacing damaged lines or hardware
- Repairs after a tip-over
Signs Your Rear Master Cylinder, Brake Needs Replacing
- Soft or spongy brake feel
- Fluid leaks at the caliper, master or lines
- Grinding or squealing when braking
- Bent pedal or damaged lever
Installation Tips
- Protect painted parts from brake fluid.
- Install the new part with new crush washers on banjo fittings.
- Fill with fresh DOT fluid of the type marked on the master cylinder cap.
- Bleed the system until the lever or pedal is firm, following the ABS procedure if equipped.
- Test the brakes at low speed before riding normally.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Victory Parts Diagrams for This Part
Find part #1910620 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Victory OEM Parts
Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Master Cylinder, Brake with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Rear Master Cylinder, Brake?
The genuine Polaris/Victory part number is 1910620. Use it to match this part to your factory parts diagram.
Which Victory models does part #1910620 fit?
It fits the Vegas (2003–2007); Kingpin (2004–2007); Hammer (2005–2007); Jackpot (2006–2007).
Is this a genuine Victory part?
Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.
Can I still get parts for my Victory?
Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.
What brake fluid does my Victory use?
Use the DOT type printed on the master cylinder cap, usually DOT 4. Do not mix types.
Do I need to bleed an ABS Victory differently?
Some ABS models need a specific procedure. Check the service manual for your model.
Should I replace pads at the same time?
If pads are near the wear limit, replace them while the brake system is open.
Order Your Genuine Victory Rear Master Cylinder, Brake Today
Ride with confidence on parts made for your bike. Order the genuine Victory Rear Master Cylinder, Brake, OEM part #1910620, from Witchdoctors today and keep your Victory Vegas, Kingpin and other cruiser models running the way Victory designed it.
Where to Ride Your Victory
Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.
-
Natchez Trace Parkway — Mississippi, Alabama and Tennessee: 444 miles of low-traffic, history-filled parkway
-
Beartooth Highway — Montana and Wyoming: switchbacks to nearly 11,000 feet near Yellowstone