Victory Oil Pump Intake Screen 2540020

Genuine Victory Sleeve — OEM Part #5133563

Broken lights are a safety risk and a ticket waiting to happen. The genuine Victory Sleeve (part #5133563) fits the Victory Vegas exactly and plugs right in.

Lighting keeps you seen and lets you see. Headlights, turn signals and brake lights must work and fit correctly to keep you safe and road-legal. This part is confirmed for 1 Victory model from 2003. See the full fitment list below.

Victory Sleeve at a Glance

• OEM part number: 5133563
• Brand: Victory Motorcycles (genuine Polaris OEM part)
• Part type: Headlight Components
• Fits: Victory Cruiser models, 2003
• Condition: New

Victory Models and Years This Sleeve Fits

Genuine Victory part #5133563 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Cruiser Fitment

Why Choose a Genuine Victory OEM Sleeve?

• Factory fit, beam pattern and brightness
• Plug-in connectors with no wire splicing
• DOT-compliant lighting for road use
• Matches the look of your other lights
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

• Genuine Polaris/Victory OEM part #5133563
• Factory mounts and connectors
• Weather-sealed housing
• Direct replacement for the listed models

Materials and Construction

Victory lighting parts use polycarbonate lenses, chrome or painted housings, steel brackets and sealed electrical connectors.

Common Reasons Riders Replace This Part

• Replacing a broken lens or housing
• Fixing a dead turn signal or brake light
• Replacing lights after a tip-over
• Restoring stock lighting after a custom setup

Signs Your Sleeve Needs Replacing

• Cracked or foggy lenses
• Flickering or dead lights
• Water inside the housing
• Loose or broken mounts

Installation Tips

1. Turn off the ignition and disconnect the battery.
2. Remove the old part and note the wire routing.
3. Apply dielectric grease to the connector and plug in the new part.
4. Mount the part and tighten hardware evenly.
5. Reconnect the battery and test all lights and signals.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #5133563 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2003 Victory Vegas parts diagrams

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

• Victory Headlight Bulb Mount Ring (#5246396)
• Victory Headlight Isolator (#5412273)

Recommended Accessories and Maintenance Supplies

Pair your Sleeve with these parts and supplies:

• Custom Dynamics LED lighting — LED turn signals, brake lights and accent lighting
• BS Battery for Victory — Sealed AGM and lithium batteries
• Victory stators and regulators — Stators, rectifiers, regulators and sensors
• Hard-to-find Victory parts — Obsolete and discontinued Victory parts
• Victory OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Can You Ride a Motorcycle in The Rain?
• Victory & Indian Motorcycle Maintenance Checklist
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride!
• How to Prepare Your Motorcycle for Winter Storage.

Frequently Asked Questions

What is the OEM part number for this Victory Sleeve?

The genuine Polaris/Victory part number is 5133563. Use it to match this part to your factory parts diagram.

Which Victory models does part #5133563 fit?

It fits the Vegas (2003).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

Will LED signals work with my Victory?

Some models need load equalizers or a module setting to prevent hyper-flash. OEM bulbs and lamps work with the factory system.

Is this light DOT compliant?

Genuine OEM lighting meets the factory standard for the listed models.

Do I need to aim my headlight?

Yes. Check the aim after replacing headlight parts.

Order Your Genuine Victory Sleeve Today

Ride with confidence on parts made for your bike. Order the genuine Victory Sleeve, OEM part #5133563, from Witchdoctors today and keep your Victory Vegas running the way Victory designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts
• Victory motorcycle parts guide

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Peak to Peak Scenic Byway — Front Range, Colorado: 55 miles of Rocky Mountain views
• San Juan Skyway and Million Dollar Highway (US 550) — southwest Colorado: a 236-mile loop over high mountain passes