Indian Exhaust Shield, Rear Lower Black 1263189-266

Genuine Indian Exhaust Shield, Rear Lower Black — OEM Part #1263189-266

Keep the sound and heat where they belong with a genuine Indian Exhaust Shield, Rear Lower Black. Built for the Indian Scout, it bolts to the original mounts and lines up with the factory headpipes and shields.

Headpipes, mufflers, heat shields, clamps and gaskets route exhaust, control noise and protect the rider from heat. This part is confirmed for 3 Indian models from 2020 to 2022.

Exhaust Shield, Rear Lower Black at a Glance

• OEM part number: 1263189-266
• Brand: Indian (genuine Polaris-made OEM part)
• Part type: Exhaust Shield
• Indian fitment: Scout, 2020–2022
• Condition: New

Models and Years This Exhaust Shield, Rear Lower Black Fits

Genuine part #1263189-266 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Indian Motorcycle Fitment

Why Choose a Genuine Indian OEM Exhaust Shield, Rear Lower Black?

• Factory fit, clearance and sound
• Works with the original EFI calibration
• Protects legs and bodywork from heat
• Uses the original hangers and clamps
• Sold by Witchdoctors, an Indian and Victory OEM parts specialist

Features and Materials

Key Features

• Genuine Indian OEM exhaust part, part #1263189-266
• Original mounting points and pipe routing
• Chrome or black finish to match (where applicable)
• Designed for the listed Indian models
• Pairs with OEM gaskets and clamps

Materials and Construction

Indian exhaust parts use steel or stainless steel pipes and mufflers with chrome or ceramic-black finishes, stamped heat shields and multi-layer exhaust gaskets.

Common Reasons Riders Replace This Part

• Fixing ticking or puffing from an exhaust leak
• Replacing a dented, rusted or blued muffler
• Tightening rattling heat shields
• Returning to stock after aftermarket pipes

Signs Your Exhaust Shield, Rear Lower Black Needs Replacing

• Ticking or puffing sound at the head
• Rattle from heat shields
• Rust, blueing or peeling chrome
• Soot around joints
• Hot spots near your leg

Installation Tips

1. Let the exhaust cool completely.
2. Spray hardware with penetrating oil before loosening.
3. Always use new exhaust gaskets at the heads.
4. Fit everything loosely, align, then tighten front to back.
5. Run the engine and check for leaks and rattles.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #1263189-266 and every part installed with it in the factory parts diagrams for your model:

• 2022 Indian Scout Bobber Sixty parts diagrams
• 2022 Indian Scout Bobber Twenty parts diagrams
• 2021 Indian Scout Bobber parts diagrams
• 2021 Indian Scout Bobber Sixty parts diagrams
• All Indian Motorcycle OEM parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Indian Exhaust Headpipe, Rear, Black (#1263481-266)
• Indian Exhaust Headpipe, Front, Black (#1263479-266)
• Indian Exhaust Shield, Rear Upper Black (#1263238-266)
• Indian Exhaust Shield, Front Black (#1263055-266)

Recommended Accessories and Maintenance Supplies

Pair your Exhaust Shield, Rear Lower Black with these parts and supplies:

• Exhaust and slip-on mufflers — Mufflers and exhaust
• Gaskets — Exhaust gaskets
• Chrome cleaners and polishes — Keep pipes shining
• Fuel tuners — Tuners for exhaust changes
• Indian Scout parts — more parts for your Scout

Helpful Guides from the Witchdoctors Blog

• Remove Burnt Rubber from Chrome Motorcycle Pipes
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride
• Victory & Indian Motorcycle Spring Inspection Checklist

Frequently Asked Questions

What is the OEM part number for this Indian Exhaust Shield, Rear Lower Black?

The genuine part number is 1263189-266. Use it to match this part to your factory parts diagram.

Which Indian motorcycles does part #1263189-266 fit?

It fits the Indian Scout Bobber (2020–2021); Indian Scout Bobber Sixty (2020–2022); Indian Scout Bobber Twenty (2020–2022).

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.

Do I need new gaskets?

Yes. Exhaust gaskets crush on install and rarely reseal.

Will stock pipes need a tune?

Returning to factory pipes usually works with the factory map. If the bike was tuned for aftermarket pipes, reset the tune.

How do I clean burnt rubber off chrome?

Our blog has a step-by-step guide.

Order Your Genuine Indian Exhaust Shield, Rear Lower Black Today

Keep your Indian motorcycle on the road. Add the genuine Indian Exhaust Shield, Rear Lower Black (part #1263189-266) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views
• Hells Canyon Scenic Byway — northeast Oregon: remote mountain and canyon miles near North America's deepest gorge