Victory Front Wheel Bearing Spacer, Mid 5335681

Genuine Victory Front Wheel Bearing Spacer, Mid — OEM Part #5335681

Wheels, axles and bearings carry the whole bike at highway speed. The genuine Victory Front Wheel Bearing Spacer, Mid is the factory part for your Victory motorcycle, with the correct size, offset and bearing fit.

Wheels, axles, spacers, bearings and seals keep the wheels true and turning smoothly. Wear shows up as wobble, noise or uneven tire wear. This part is confirmed for 12 Victory models from 2009 to 2017.

Front Wheel Bearing Spacer, Mid at a Glance

• OEM part number: 5335681
• Brand: Victory (genuine Polaris-made OEM part)
• Part type: Wheel Spacer
• Victory fitment: Cross Country, Cross Roads, Hammer, Hardball, Jackpot, Kingpin, Magnum, Vegas, Vision and X1, 2009–2017
• Condition: New

Models and Years This Front Wheel Bearing Spacer, Mid Fits

Genuine part #5335681 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Victory Motorcycle Fitment

Why Choose a Genuine Victory OEM Front Wheel Bearing Spacer, Mid?

• Factory size, offset and alignment
• Correct bearing and spacer fit
• Keeps ABS and speedometer readings right
• Matches the factory finish
• Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years

Features and Materials

Key Features

• Genuine Victory OEM wheel or axle part, part #5335681
• Original dimensions and fitment
• Factory finish where applicable
• Designed for the listed Victory models
• Works with original rotors, pulleys and sensors

Materials and Construction

Victory wheels are cast aluminum with painted, machined or chrome finishes; axles and spacers are hardened steel; bearings are sealed steel units.

Common Reasons Riders Replace This Part

• Replacing a bent or cracked wheel
• Replacing worn bearings and seals
• Replacing a damaged axle or spacer
• Restoring factory wheels after aftermarket ones

Signs Your Front Wheel Bearing Spacer, Mid Needs Replacing

• Wobble or vibration at speed
• Grinding or roughness when spinning the wheel
• Play in the wheel when rocked
• Bent rim or cracked spokes
• Uneven tire wear

Installation Tips

1. Support the bike so the wheel is off the ground.
2. Follow the Victory service manual for axle torque and spacer order.
3. Install bearings with the correct driver, never on the inner race.
4. Check belt alignment (rear) and ABS sensor gap after installation.
5. Torque the axle and pinch bolts and test-ride gently.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #5335681 and every part installed with it in the factory parts diagrams for your model:

• 2017 Victory Cross Country parts diagrams
• 2017 Victory Cross Country Tour parts diagrams
• 2017 Victory Hammer parts diagrams
• 2017 Victory Magnum parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Victory Axle Adjuster (#1014895H)
• Victory Axle Indicator Washer (#5248452-236)
• Victory Front Axle Bolt (#7519882)
• Victory Wheel Speed Sensor (#4011884)
• Victory Speed Sensor (#4011884-WD)
• Victory Rear Axle Lock Nut (#7547226)

Recommended Accessories and Maintenance Supplies

Pair your Front Wheel Bearing Spacer, Mid with these parts and supplies:

• Wheel bearings, seals and axles — Bearings and axles
• Victory and Indian tires — Tires
• Valve stem caps — Valve caps
• Balancing beads and sealer — Wheel balancing
• Victory OEM parts diagrams — find every factory part for your bike

Helpful Guides from the Witchdoctors Blog

• Motorcycle Tire Performance and Tire Pressure
• Radial vs Bias Ply Motorcycle Tires-Understanding the Difference
• Expert Guide To Victory Motorcycle Wheel Speed Sensors
• Victory OEM Parts vs Aftermarket Parts: Which Is Right?

Frequently Asked Questions

What is the OEM part number for this Victory Front Wheel Bearing Spacer, Mid?

The genuine part number is 5335681. Use it to match this part to your factory parts diagram.

Which Victory motorcycles does part #5335681 fit?

It fits 12 Victory models (Cross Country, Cross Roads, Hammer, Hardball, Jackpot, Kingpin, Magnum, Vegas, Vision and X1) from 2009 to 2017. See the Victory fitment table above.

Does part #5335681 fit Indian motorcycles?

Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.

Should I replace both wheel bearings?

Yes. Replace bearings and seals in pairs.

Will the ABS work with this wheel?

Factory wheels for ABS models carry the correct tone ring. Match the part number for your model.

What tire pressure should I run?

Use the pressures on your bike's label and in the owner's manual.

Order Your Genuine Victory Front Wheel Bearing Spacer, Mid Today

Keep your Victory motorcycle on the road. Add the genuine Victory Front Wheel Bearing Spacer, Mid (part #5335681) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts

Where to Ride Your Victory

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Overseas Highway — Florida Keys: 113 miles of bridges and open water
• Historic Route 66 — Illinois to California: America's most famous road trip