Genuine Indian Rear Drive Pulley Bearing Spacer — OEM Part #5337916
Missed shifts, clutch slip and belt noise all trace back to the driveline. The genuine Indian Rear Drive Pulley Bearing Spacer restores the factory clutch, transmission or final drive on your Indian motorcycle, built to Indian's original specification.
The clutch, primary, six-speed transmission, shifter, pulleys and drive belt carry every bit of engine torque to the rear wheel. This part is confirmed for 18 Indian models from 2015 to 2026.
Rear Drive Pulley Bearing Spacer at a Glance
-
OEM part number: 5337916
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: Drive Pulley
-
Indian fitment: 101 Scout, Scout, Sport and Super, 2015–2026
-
Condition: New
Models and Years This Rear Drive Pulley Bearing Spacer Fits
Genuine part #5337916 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian 101 Scout |
2025–2026 |
| Indian Scout |
2015–2016, 2023–2024 |
| Indian Scout 1200 |
2017–2022 |
| Indian Scout 1200 Anniversary |
2020 |
| Indian Scout Bobber |
2018–2026 |
| Indian Scout Bobber 125TH Anniversary Edition |
2026 |
| Indian Scout Bobber Sixty |
2020–2024 |
| Indian Scout Bobber Twenty |
2020–2024 |
| Indian Scout Classic |
2025–2026 |
| Indian Scout Rogue |
2022–2024 |
| Indian Scout Rogue Sixty |
2022–2024 |
| Indian Scout Sixty |
2016–2024 |
| Indian Scout Sixty Bobber |
2025–2026 |
| Indian Scout Sixty Classic |
2025–2026 |
| Indian Sport Scout |
2025–2026 |
| Indian Sport Scout Rt |
2026 |
| Indian Sport Scout Sixty |
2025–2026 |
| Indian Super Scout |
2025–2026 |
Why Choose a Genuine Indian OEM Rear Drive Pulley Bearing Spacer?
- Exact gear, spline and bearing fit
- Restores smooth clutch engagement and shifting
- Correct belt alignment and tension
- Built for full Indian V-twin torque
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM driveline part, part #5337916
- Machined to Indian's original specification
- Hardened surfaces where applicable
- Designed for the listed Indian models
- Works with factory belts, pulleys and clutch parts
Materials and Construction
Indian driveline parts use heat-treated steel gears, shafts and shift forks, friction and steel clutch plates, aluminum pulleys and covers, and carbon-fiber-reinforced drive belts.
Common Reasons Riders Replace This Part
- Fixing clutch slip or a heavy clutch pull
- Repairing missed shifts or false neutrals
- Replacing a worn or damaged belt or pulley
- Rebuilding the transmission
Signs Your Rear Drive Pulley Bearing Spacer Needs Replacing
- Clutch slipping under load
- Hard shifting or false neutrals
- Clunking or whining from the transmission
- Frayed, cracked or noisy drive belt
- Worn or damaged pulley teeth
Installation Tips
- Follow the Indian service manual for clutch, transmission and belt procedures.
- Replace gaskets and seals you disturb.
- Set belt tension and alignment with the correct gauge.
- Adjust clutch free play to spec.
- Test-ride gently and recheck belt tension after a few miles.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5337916 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Drive Pulley Bearing Spacer with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Rear Drive Pulley Bearing Spacer?
The genuine part number is 5337916. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #5337916 fit?
It fits 18 Indian models (101 Scout, Scout, Sport and Super) from 2015 to 2026. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
How do I check belt tension?
Use a belt tension gauge at the spec in your manual. Our blog covers belt checks step by step.
Should I replace both pulleys with a new belt?
Inspect the teeth. Worn or damaged pulleys will chew up a new belt.
What causes false neutrals?
Worn shift forks or detent parts, or a misadjusted shifter linkage.
Order Your Genuine Indian Rear Drive Pulley Bearing Spacer Today
Keep your Indian motorcycle on the road. Add the genuine Indian Rear Drive Pulley Bearing Spacer (part #5337916) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.