Genuine Yamaha Spark Arrester — OEM Part #BG4-E4780-01-00
A rattling heat shield or leaking exhaust can cook nearby parts and wiring. The genuine Yamaha Spark Arrester restores the factory exhaust and heat protection on your Wolverine X2 or Wolverine X4, with the right fit, clearances and mounting.
The exhaust routes hot gas away from the engine, controls noise and keeps heat away from panels, wiring and riders. Loose shields and leaks lead to melted parts and failed inspections. This part is confirmed for 31 Yamaha models from 2018 to 2026. See the full fitment list below.
Spark Arrester at a Glance
-
OEM part number: BG4-E4780-01-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Spark Arrestor
-
Fits: Wolverine recreation side-by-side models, 2018–2026
-
Condition: New
Yamaha Models and Years This Spark Arrester Fits
Genuine Yamaha part #BG4-E4780-01-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine X2 |
2019–2020 |
| Yamaha Wolverine X2 850 |
2021–2022 |
| Yamaha Wolverine X2 850 R-Spec |
2019–2023 |
| Yamaha Wolverine X2 850 XT |
2026 |
| Yamaha Wolverine X2 850 XT-R |
2020, 2022–2023 |
| Yamaha Wolverine X2 EPS |
2020–2021 |
| Yamaha Wolverine X2 EPS Hun |
2021–2022 |
| Yamaha Wolverine X2 EPS Hunter |
2021–2022 |
| Yamaha Wolverine X2 EPS R S |
2022 |
| Yamaha Wolverine X2 EPS SE |
2021 |
| Yamaha Wolverine X2 EPS XT-R |
2022 |
| Yamaha Wolverine X2 EPS XTR |
2022 |
| Yamaha Wolverine X2 R |
2019–2020 |
| Yamaha Wolverine X2 R-Spec |
2019–2020, 2023–2024 |
| Yamaha Wolverine X2 XT-R |
2020, 2023–2025 |
| Yamaha Wolverine X2 XTR |
2020, 2023 |
| Yamaha Wolverine X4 |
2018–2020 |
| Yamaha Wolverine X4 850 |
2021 |
| Yamaha Wolverine X4 850 R-Spec |
2022–2023 |
| Yamaha Wolverine X4 850 XT |
2026 |
| Yamaha Wolverine X4 850 XT-R |
2020–2023 |
| Yamaha Wolverine X4 EPS |
2021 |
| Yamaha Wolverine X4 EPS R S |
2022 |
| Yamaha Wolverine X4 EPS SE |
2021 |
| Yamaha Wolverine X4 EPS XT |
2022 |
| Yamaha Wolverine X4 Hunter |
2018–2020 |
| Yamaha Wolverine X4 R-Spec |
2023–2024 |
| Yamaha Wolverine X4 SE |
2018–2019 |
| Yamaha Wolverine X4 Special |
2018–2019 |
| Yamaha Wolverine X4 XT-R |
2020, 2023–2025 |
| Yamaha Wolverine X4 XTR |
2020, 2023 |
Why Choose a Genuine Yamaha OEM Spark Arrester?
- Factory fit and clearances
- Keeps noise at factory levels for trail rules
- Protects plastics, wiring and riders from heat
- Uses the original hangers, gaskets and hardware
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM exhaust part, part #BG4-E4780-01-00
- Original mounting points and pipe routing
- High-temperature materials and finishes
- Designed for the listed Yamaha engines
- Pairs with OEM gaskets and hardware on the same diagram
Materials and Construction
Yamaha exhaust parts are heat-resistant steel or stainless steel. Heat shields use stamped steel, aluminum or insulated layers, and gaskets use graphite or multi-layer steel to seal at high temperature.
Common Reasons Riders Replace This Part
- Fixing rattles from loose or broken heat shields
- Repairing exhaust leaks at joints
- Replacing a damaged muffler or spark arrestor
- Meeting trail noise and spark arrestor rules
Signs Your Spark Arrester Needs Replacing
- Rattling or buzzing from the exhaust area
- Ticking or puffing from a leak
- Melted or discolored plastics near the exhaust
- Soot around joints and gaskets
- A damaged, clogged or missing spark arrestor
Installation Tips
- Let the exhaust cool completely.
- Spray hardware with penetrating oil, since exhaust bolts often seize.
- Replace gaskets at every joint you open.
- Fit with hardware loose, align for clearance, then tighten to spec.
- Run the engine and check for leaks, rattles and clearance to plastics.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #BG4-E4780-01-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Spark Arrester with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Spark Arrester?
The genuine Yamaha part number is BG4-E4780-01-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #BG4-E4780-01-00 fit?
It fits 31 Yamaha Wolverine models from 2018 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a spark arrestor?
Most public trails require a working, approved spark arrestor. Check local rules.
Will an aftermarket exhaust add horsepower?
Sometimes a little, but often mostly noise, and it may need retuning. OEM keeps factory noise and performance.
Should I reuse exhaust gaskets?
No. They crush when tightened and rarely reseal.
Order Your Genuine Yamaha Spark Arrester Today
Get your Wolverine X2 or Wolverine X4 back to factory condition. Add the genuine Yamaha Spark Arrester (part #BG4-E4780-01-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.