Victory Clutch Spring, Belleville, 2.54Mm 7043639

Genuine Victory Clutch Spring, Belleville, 2.54Mm — OEM Part #7043639

Get smooth launches and clean shifts back with the genuine Victory Victory Clutch Spring, Belleville, 2.54Mm, Polaris part #7043639. It is the factory clutch or primary part for the Victory Cross Country, Hammer and other models.

The clutch and primary drive transfer engine power to the transmission and let you launch smoothly. Worn parts cause slipping, dragging and hard shifts. This part is confirmed for 15 Victory models from 2012 to 2017. See the full fitment list below.

Victory Clutch Spring, Belleville, 2.54Mm at a Glance

• OEM part number: 7043639
• Brand: Victory Motorcycles (genuine Polaris OEM part)
• Part type: Spring
• Fits: Victory Bagger and Touring and Cruiser models, 2012–2017
• Condition: New

Victory Models and Years This Clutch Spring, Belleville, 2.54Mm Fits

Genuine Victory part #7043639 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Bagger and Touring Fitment

Victory Cruiser Fitment

Why Choose a Genuine Victory OEM Clutch Spring, Belleville, 2.54Mm?

• Factory engagement feel and lever pull
• Correct friction and spring rates for Victory torque
• Smooth, predictable launches
• Reduces wear on the transmission
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

• Genuine Polaris/Victory OEM part #7043639
• Matches original dimensions and splines
• Designed for the wet clutch in the Victory oil bath
• Direct replacement for the listed models

Materials and Construction

Victory clutch parts use bonded friction plates, hardened steel plates and springs, and machined aluminum or steel hubs and baskets built to run in engine oil.

Common Reasons Riders Replace This Part

• Fixing a slipping clutch under acceleration
• Curing clutch drag or hard neutral
• Clutch rebuilds at high mileage
• Replacing worn clutch switches or hardware

Signs Your Clutch Spring, Belleville, 2.54Mm Needs Replacing

• Engine revs rise but speed does not
• Hard to find neutral or the bike creeps in gear
• Clunky or notchy shifts
• Burnt smell or debris in the oil

Installation Tips

1. Drain oil if the job requires opening the primary or clutch cover.
2. Remove the cover and note the order of plates and springs.
3. Soak new friction plates in the recommended oil before installing.
4. Install parts in the factory order and torque bolts in a cross pattern.
5. Adjust the clutch cable or check hydraulic free play, then refill and test-ride.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #7043639 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2017 Victory Cross Country parts diagrams
• 2017 Victory Cross Country Tour parts diagrams
• 2017 Victory Gunner parts diagrams
• 2017 Victory Hammer parts diagrams
• 2017 Victory High-Ball parts diagrams
• 2017 Victory Judge parts diagrams
• 2017 Victory Magnum parts diagrams
• 2017 Victory Vegas parts diagrams

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

• Victory Clutch Spring, Belleville, .9Mm (#7043638)
• Victory Shock Compression Spring, KYB (#7043119)
• Victory Clutch Spring, Belleville (#7042019)
• Victory Fuel Tank Panel Spring, Steel (#5249661)
• Victory Lower Spring (#7043625)
• Victory Shock Compression Spring, KYB (#7042329)

Recommended Accessories and Maintenance Supplies

Pair your Clutch Spring, Belleville, 2.54Mm with these parts and supplies:

• Barnett cables for Victory — Clutch and throttle cables
• Klotz Victory oil change kits — Complete oil change kits with free shipping
• Victory engine parts — Gaskets, seals, bearings and internal engine parts
• Victory maintenance essentials — Filters, plugs, fluids and wear items
• Victory OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• What Does JASO Rated Oil Mean and Why Does It Matter?
• Victory Motorcycle Oil: Choosing the Right Fit
• Can You Still Get Parts for Victory Motorcycles?
• Victory & Indian Motorcycle Maintenance Checklist

Frequently Asked Questions

What is the OEM part number for this Victory Clutch Spring, Belleville, 2.54Mm?

The genuine Polaris/Victory part number is 7043639. Use it to match this part to your factory parts diagram.

Which Victory models does part #7043639 fit?

It fits the Cross Country (2012–2017); Cross Roads (2012–2014); Hammer (2012–2017); Jackpot (2012–2016); Vegas (2012–2017); Vision (2012–2017); Boardwalk (2013–2015); Cross Country Tour (2013–2017); Cross Roads Classic (2013–2014); Hard-Ball (2013); High-Ball (2013–2017); Judge (2013–2017); Gunner (2015–2017); Magnum (2015–2017); Magnum X-1 (2015–2017).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

Should I replace all clutch plates together?

Yes. Replacing friction and steel plates as a set gives even engagement and the longest life.

Can the wrong oil make my clutch slip?

Yes. Use a JASO MA-rated motorcycle oil. Oils with friction modifiers can cause slipping.

Do I need a new cover gasket?

Usually. Replace the gasket or O-ring whenever the cover is removed.

Order Your Genuine Victory Clutch Spring, Belleville, 2.54Mm Today

Ride with confidence on parts made for your bike. Order the genuine Victory Clutch Spring, Belleville, 2.54Mm, OEM part #7043639, from Witchdoctors today and keep your Victory Cross Country, Hammer and other models running the way Victory designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts
• Victory motorcycle parts guide

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Back of the Dragon (VA Route 16) — Tazewell to Marion, Virginia: 32 miles and hundreds of curves over three mountains
• Hocking Hills Scenic Byway (SR 374) — Hocking Hills, Ohio: forested hills, caves and waterfalls