Genuine Polaris Terminal Block 3 Post — OEM Part #4011892
Restore reliable power and electronics with a genuine Polaris Terminal Block 3 Post. Built for the Polaris ATV or side-by-side, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 178 Polaris models from 2007 to 2024. See the full fitment list below.
Terminal Block 3 Post at a Glance
-
OEM part number: 4011892
-
Brand: Polaris (genuine factory part)
-
Part type: Battery Terminal
-
Fits: ACE single-seat, Farmhand utility vehicle, Hawkeye ATV, low-speed vehicle, other Polaris, RZR sport side-by-side, Ranger utility side-by-side and Sportsman ATV models, 2007–2024
-
Condition: New
Polaris Models and Years This Terminal Block 3 Post Fits
Genuine Polaris part #4011892 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 178 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris ACE single-seat Fitment
| Model Family |
Model Years |
Trims |
| Polaris ACE 325 |
2016 |
1 |
| Polaris ACE 570 |
2016 |
4 |
| Polaris ACE 900 |
2016 |
1 |
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye 325 |
2015 |
1 |
Polaris low-speed vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris LSV |
2011–2012 |
1 |
Polaris other Polaris Fitment
| Model Family |
Model Years |
Trims |
| Polaris Polaris |
2015 |
1 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR 900 |
2015 |
5 |
| Polaris RZR XP |
2014–2016 |
6 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2008–2010, 2015 |
2 |
| Polaris Ranger 2x4 |
2008–2009 |
2 |
| Polaris Ranger 4x4 |
2007–2011 |
5 |
| Polaris Ranger 6x6 |
2007–2013, 2015 |
4 |
| Polaris Ranger 48V |
2013 |
1 |
| Polaris Ranger 400 |
2010–2014 |
5 |
| Polaris Ranger 500 |
2007–2013 |
11 |
| Polaris Ranger 570 |
2014–2015 |
8 |
| Polaris Ranger 700 |
2007–2009 |
4 |
| Polaris Ranger 800 |
2011–2017 |
11 |
| Polaris Ranger 900 |
2011–2015 |
10 |
| Polaris Ranger 1000 |
2015 |
2 |
| Polaris Ranger Diesel |
2011–2015 |
6 |
| Polaris Ranger ETX |
2015 |
1 |
| Polaris Ranger EV |
2010–2014 |
2 |
| Polaris Ranger Hst |
2015 |
1 |
| Polaris Ranger Lsv |
2011–2012 |
1 |
| Polaris Ranger XP |
2012–2015 |
5 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015–2016 |
3 |
| Polaris Sportsman 450 |
2016–2020 |
5 |
| Polaris Sportsman 570 |
2014–2024 |
46 |
| Polaris Sportsman ACE |
2014–2015 |
8 |
| Polaris Sportsman EFI |
2016–2017 |
1 |
| Polaris Sportsman ETX |
2015 |
2 |
| Polaris Sportsman Touring |
2014–2024 |
10 |
| Polaris Sportsman X2 |
2019 |
1 |
Why Choose a Genuine Polaris OEM Terminal Block 3 Post?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #4011892
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Terminal Block 3 Post Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #4011892 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Terminal Block 3 Post with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Terminal Block 3 Post?
The genuine Polaris part number is 4011892. Use it to match this part to your factory parts diagram.
Which Polaris models does part #4011892 fit?
It fits 178 Polaris ACE, Farmhand, Hawkeye, LSV, RZR, Ranger and Sportsman models from 2007 to 2024. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Terminal Block 3 Post Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Terminal Block 3 Post, OEM part #4011892, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.