Genuine Polaris Diesel Throttle Cable — OEM Part #7081676
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Polaris Diesel Throttle Cable restores the factory fit of the cab on your Ranger 900 or Ranger Diesel, so doors close cleanly, seals stay tight and everything lines up the way it did when new.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 5 Polaris models from 2011 to 2014. See the full fitment list below.
Diesel Throttle Cable at a Glance
-
OEM part number: 7081676
-
Brand: Polaris (genuine factory part)
-
Part type: Control Cables
-
Fits: Ranger utility side-by-side models, 2011–2014
-
Condition: New
Polaris Models and Years This Diesel Throttle Cable Fits
Genuine Polaris part #7081676 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 900 4x4 D |
2011 |
| Polaris Ranger 900 Diesel |
2012–2014 |
| Polaris Ranger Crew Diesel |
2014 |
| Polaris Ranger Diesel |
2011–2013 |
| Polaris Ranger Diesel Intl |
2014 |
Why Choose a Genuine Polaris OEM Diesel Throttle Cable?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cab part, part #7081676
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Polaris cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Diesel Throttle Cable Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Polaris parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
- Polaris Front Cab Frame, Left, Sunset Red Pearl (#1017300-521)
- Polaris Front Cab Frame, Left, Sunset Red Pearl (#1017165-521)
- Polaris Front Cab Frame, Right, Sunset Red Pearl (#1017166-521)
- Polaris Front Cab Frame, Sunset Red Pearl (#1017167-521)
- Polaris Front Cab Frame, Right, Sunset Red Pearl (#1017301-521)
- Polaris Cab Frame, Sunset Red Pearl (#1017292-521)
Recommended Accessories and Maintenance Supplies
Pair your Diesel Throttle Cable with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Diesel Throttle Cable?
The genuine Polaris part number is 7081676. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7081676 fit?
It fits the Ranger 900 4x4 D (2011); Ranger 900 Diesel (2012–2014); Ranger Crew Diesel (2014); Ranger Diesel (2011–2013); Ranger Diesel Intl (2014).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Polaris cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Polaris Diesel Throttle Cable Today
Get your Ranger 900 or Ranger Diesel back to factory condition. Add the genuine Polaris Diesel Throttle Cable (part #7081676) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.