Genuine Polaris Throttle Position Sensor Harnes — OEM Part #2878498
Restore reliable power and electronics with a genuine Polaris Throttle Position Sensor Harnes. Built for the Polaris ATV or side-by-side, it matches the factory connectors and electrical values, with no splicing or adapters.
Harnesses, switches, relays, sensors, charging parts and control modules all talk to each other. A wrong connector or out-of-spec part can cause no-starts, warning lights or damage to other electronics. This part is confirmed for 101 Polaris models from 2006 to 2021. See the full fitment list below.
Throttle Position Sensor Harnes at a Glance
-
OEM part number: 2878498
-
Brand: Polaris (genuine factory part)
-
Part type: Throttle Position Sensor
-
Fits: RZR sport side-by-side, Ranger utility side-by-side, Scrambler ATV and Sportsman ATV models, 2006–2021
-
Condition: New
Polaris Models and Years This Throttle Position Sensor Harnes Fits
Genuine Polaris part #2878498 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 101 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2011–2013 |
3 |
| Polaris RZR 570 |
2012–2016 |
2 |
| Polaris RZR 800 |
2011–2012, 2014 |
4 |
| Polaris RZR S |
2012–2014 |
3 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger 4x4 |
2007, 2009–2011 |
4 |
| Polaris Ranger 6x6 |
2011–2013, 2015 |
3 |
| Polaris Ranger 500 |
2006–2007, 2009–2010 |
2 |
| Polaris Ranger 800 |
2011–2017 |
9 |
| Polaris Ranger XP |
2012 |
1 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 850 |
2013–2014 |
3 |
| Polaris Scrambler 1000 |
2014–2019 |
4 |
| Polaris Scrambler HO |
2013 |
1 |
| Polaris Scrambler XP |
2014–2018, 2020 |
5 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman |
2015 |
2 |
| Polaris Sportsman 500 |
2006–2010 |
4 |
| Polaris Sportsman 550 |
2010–2014 |
3 |
| Polaris Sportsman 850 |
2015–2019 |
5 |
| Polaris Sportsman 1000 |
2015–2019 |
4 |
| Polaris Sportsman Forest |
2011–2014 |
5 |
| Polaris Sportsman Touring |
2008–2019 |
12 |
| Polaris Sportsman X2 |
2006–2014 |
6 |
| Polaris Sportsman XP |
2009–2021 |
16 |
Why Choose a Genuine Polaris OEM Throttle Position Sensor Harnes?
- Plug-and-play fit with factory connectors
- Correct electrical ratings for your machine
- Weather-sealed for mud, water and pressure washing
- Works with the factory ECU, gauges and diagnostics
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM electrical part, part #2878498
- Original connectors, terminals and pin-outs
- Water- and vibration-resistant construction
- Designed for the listed Polaris models
- No splicing or adapters needed
Materials and Construction
Polaris electrical parts use tinned copper conductors, sealed connectors, heat- and abrasion-resistant insulation and loom, and sealed housings for modules and sensors exposed to water and vibration.
Common Reasons Riders Replace This Part
- Fixing no-start, no-charge or intermittent faults
- Replacing harness sections damaged by rodents, heat or abrasion
- Replacing failed switches, relays, sensors or modules
- Restoring gauge functions and warning lights
Signs Your Throttle Position Sensor Harnes Needs Replacing
- No-start, clicking or intermittent power loss
- Check engine or warning lights
- Battery not charging
- Melted, corroded or broken connectors and wires
- Switches, gauges or accessories that do not work
Installation Tips
- Disconnect the negative battery cable first.
- Use the Polaris parts and wiring diagrams to confirm routing and connectors.
- Clean corroded connectors with contact cleaner.
- Make sure every connector clicks fully and seals.
- Route wiring away from heat and moving parts, then test.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #2878498 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Throttle Position Sensor Harnes with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Throttle Position Sensor Harnes?
The genuine Polaris part number is 2878498. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2878498 fit?
It fits 101 Polaris RZR, Ranger, Scrambler and Sportsman models from 2006 to 2021. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this part need programming?
Most plug-in parts do not. Some modules and keys need dealer programming. Check your service manual or contact us before ordering.
How do I find an electrical problem before buying parts?
Start with the battery, grounds and fuses. Many faults are a loose ground or corroded connector.
Should I use dielectric grease?
A light coat on connector seals helps keep water out. Follow your service manual.
Order Your Genuine Polaris Throttle Position Sensor Harnes Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Throttle Position Sensor Harnes, OEM part #2878498, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.