Genuine Polaris Tie Rod — OEM Part #5020926
Steer with confidence again with a genuine Polaris Tie Rod. Built for the Polaris ATV or side-by-side, it matches the factory splines, joints and mounting points, so the steering feels tight and works with Polaris EPS where equipped.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 18 Polaris models from 2002 to 2013. See the full fitment list below.
Tie Rod at a Glance
-
OEM part number: 5020926
-
Brand: Polaris (genuine factory part)
-
Part type: Tie Rod
-
Fits: ATP ATV, Polaris ATV, Magnum ATV, Ranger utility side-by-side, Scrambler ATV, Series 10/11 ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2002–2013
-
Condition: New
Polaris Models and Years This Tie Rod Fits
Genuine Polaris part #5020926 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris ATP ATV Fitment
| Model |
Model Years |
| Polaris Atp 330 4x4 |
2004–2005 |
| Polaris Atp 500 4x4 |
2004–2005 |
Polaris Polaris ATV Fitment
| Model |
Model Years |
| Polaris ATV PRO 500 4x4 |
2002 |
Polaris Magnum ATV Fitment
| Model |
Model Years |
| Polaris Magnum 330 4x4 |
2003–2006 |
| Polaris Magnum 500 4x4 Hds |
2003 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 700 Commercial EFI 6x6 |
2002 |
Polaris Scrambler ATV Fitment
| Model |
Model Years |
| Polaris Scrambler 500 4x4 |
2003–2012 |
Polaris Series 10/11 ATV Fitment
| Model |
Model Years |
| Polaris Series 10 Ptv 4x4 |
2003 |
| Polaris Series 10 Ptv 6x6 |
2003 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman 6x6 |
2003–2008 |
| Polaris Sportsman 400 |
2003–2004 |
| Polaris Sportsman 500 |
2004 |
| Polaris Sportsman 500 HO |
2003 |
| Polaris Sportsman 600 |
2003–2004 |
| Polaris Sportsman 700 |
2003–2004 |
Polaris Trail Blazer ATV Fitment
| Model |
Model Years |
| Polaris Trail Blazer 330 |
2010–2013 |
Polaris Trail Boss ATV Fitment
| Model |
Model Years |
| Polaris Trail Boss 330 |
2010–2013 |
| Polaris Trail Boss 330 Intl |
2010–2012 |
Why Choose a Genuine Polaris OEM Tie Rod?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Polaris EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM steering part, part #5020926
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Polaris models
- Works with factory power steering units, sensors and wiring where applicable
Materials and Construction
Polaris steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed power steering motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing power steering faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Tie Rod Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a power steering warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Polaris parts diagram for hardware, cotter pins and power steering connectors.
- Disconnect the battery before working on power steering parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Tie Rod with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Tie Rod?
The genuine Polaris part number is 5020926. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5020926 fit?
It fits 18 Polaris ATP, ATV, Magnum, Ranger, Scrambler, Series, Sportsman, Trail Blazer and Trail Boss models from 2002 to 2013. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does power steering need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Polaris Tie Rod Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Tie Rod, OEM part #5020926, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.