Top Roof Kit 9030-3602A0 by CFMOTO

Genuine CFMoto Top Roof Kit — OEM Part #9030-3602A0

Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine CFMoto Top Roof Kit restores the factory fit of the cab on your UForce 500 or UForce 600, so doors close cleanly, seals stay tight and everything lines up the way it did when the machine was new.

Cab components keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece can cause rattles, leaks and safety problems. This part is confirmed for 2 CFMoto models from 2008 to 2014. See the full fitment list below.

Top Roof Kit at a Glance

• OEM part number: 9030-3602A0
• Brand: CFMOTO (genuine factory part)
• Part type: Roof
• Fits: UForce utility UTV models, 2008–2014
• Condition: New

CFMoto Models and Years This Top Roof Kit Fits

Genuine CFMoto part #9030-3602A0 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto UForce utility UTV Fitment

Why Choose a Genuine CFMoto OEM Top Roof Kit?

• Factory fit with the cab frame, doors and roof
• Helps keep dust, water and wind out of the cockpit
• Restores proper door, window and latch operation
• Maintains the structural integrity CFMoto designed into the cab
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM cab part, part #9030-3602A0
• Built to original CFMoto dimensions and mounting points
• Works with factory seals, hinges, latches and hardware
• Matches the original finish for a clean, factory look
• Designed for the vibration and flex of off-road use

Materials and Construction

CFMoto cab components use materials matched to the job: powder-coated or e-coated steel for frame and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels. Each is chosen to survive vibration, moisture and sun.

Common Reasons Riders Replace This Part

• Repairing a cab after a rollover or impact
• Fixing doors that rattle, sag or will not stay latched
• Sealing out dust and water on a cab-enclosed machine
• Restoring a machine to factory condition for resale

Signs Your Top Roof Kit Needs Replacing

• Doors or windows that rattle, sag or will not close
• Water or dust getting into the cab
• Bent, cracked or broken cab pieces after an impact
• Seals that are torn, flattened or hardened
• Corrosion or broken welds on frame components

Installation Tips

1. Pull up the CFMoto parts diagram for the cab to see how the part fits and which hardware it uses.
2. Support doors, glass or the roof before loosening any hardware so nothing drops.
3. Clean mounting surfaces and check surrounding parts for damage.
4. Install the new part with all bolts finger-tight, check alignment and door gaps, then tighten to spec.
5. Test doors, latches and windows, and check for leaks with a light water spray.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Top Roof Kit with these parts and supplies:

• UTV doors and windows — Half doors, full doors and window kits
• UTV windshields — Full, half and folding windshields
• UTV cab enclosures — Weather protection for year-round riding
• UTV side view mirrors — Side mirrors for better visibility
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Enclosed Cab Window Glass Buyer’s Guide
• UTV Windshields: The Ultimate Buyer's Guide
• UTV Windshield Wipers Buyer’s Guide | See Clearly!
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Top Roof Kit?

The genuine CFMoto part number is 9030-3602A0. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9030-3602A0 fit?

It fits the UForce 500 (2008–2010); UForce 600 (2011–2014).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Will this part fit a cab with aftermarket doors or windows?

It is designed for the factory CFMoto cab on the listed models. Aftermarket doors, roofs and glass may use different mounting points, so check with the accessory maker before ordering.

Do I need special tools to install cab parts?

Most cab parts install with common hand tools. Large panels, doors and glass are much easier with a second person to hold them in place.

Is the cab frame safe to repair after a rollover?

Bent or cracked structural parts should be replaced, not straightened. If you are unsure, have the cab inspected before riding again.

About Availability of Part #9030-3602A0

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Stony Lonesome OHV Park — Bremen, Alabama: about 100 miles of trails
• Burning Rock Offroad Park — Tams, West Virginia: 100 miles of trails (UTVs up to 64 in. wide)