Genuine Indian & Polaris Valve Spring — OEM Part #7045027
Rebuild with confidence. The genuine Indian & Polaris Valve Spring is the factory engine part for your Indian Scout or FTR, machined to Indian's original specification for correct clearances, sealing and long life.
Engine internals, gaskets and covers work under heat, pressure and vibration. A part that is slightly off can cause oil leaks, noise or serious engine damage. Because Indian and Polaris are both Polaris Inc. brands, this part number is shared across Indian motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Valve Spring at a Glance
-
OEM part number: 7045027
-
Brand: Indian & Polaris (genuine Polaris-made OEM part)
-
Part type: Valvetrain
-
Indian fitment: FTR and Scout, 2015–2022
-
Polaris off-road fitment: RZR, 2018–2026
-
Condition: New
Models and Years This Valve Spring Fits
Genuine part #7045027 fits the models and years below, across Indian motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian FTR 1200 |
2019–2020, 2022 |
| Indian FTR 1200 Carbon |
2022 |
| Indian FTR 1200 Carbon LE |
2020 |
| Indian FTR 1200 Rally |
2020, 2022 |
| Indian FTR 1200 Rally LE |
2019 |
| Indian FTR 1200 S |
2019 |
| Indian Scout |
2015–2016 |
| Indian Scout 1200 |
2017–2022 |
| Indian Scout 1200 Anniversary |
2020 |
| Indian Scout Bobber |
2018–2022 |
| Indian Scout Bobber Twenty |
2020–2022 |
| Indian Scout Rogue |
2022 |
| Indian Scout Sixty |
2016–2017 |
Polaris Off-Road Vehicle Fitment
106 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris RZR |
2018–2026 |
106 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Indian & Polaris OEM Valve Spring?
- Factory tolerances for correct clearances
- Designed to work with the other OEM parts in the Indian engine
- Correct sealing surfaces and gasket thickness
- Lowers the risk of a repeat teardown
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian & Polaris OEM engine part, part #7045027
- Machined to Indian's original specification
- Matches factory sealing surfaces and mounting points
- Made for the heat and loads of the Indian V-twin
- Pairs with gaskets and seals on the same parts diagram
Materials and Construction
Indian engine parts use aluminum alloy castings for cases, cylinders and covers, heat-treated steel for cams, shafts and valvetrain parts, and multi-layer or composite gaskets with elastomer oil seals.
Common Reasons Riders Replace This Part
- Top-end or full engine rebuilds
- Fixing oil leaks at covers, cases and seals
- Repairing cam chain tensioner or valvetrain wear
- Restoring compression and power on a high-mileage engine
Signs Your Valve Spring Needs Replacing
- Oil leaks at covers, base gaskets or seals
- Ticking, knocking or cam chain noise
- Low compression or power loss
- Blue smoke or high oil use
- Metal debris on the drain plug magnet
Installation Tips
- Follow the Indian service manual; engine work needs exact procedures and torque specs.
- Clean all mating surfaces and replace every gasket and seal you disturb.
- Measure critical clearances before final assembly.
- Lubricate parts with clean engine oil or assembly lube.
- Torque in sequence, refill oil and check for leaks.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7045027 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Valve Spring with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian & Polaris Valve Spring?
The genuine part number is 7045027. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #7045027 fit?
It fits 13 Indian models (FTR and Scout) from 2015 to 2022. See the Indian fitment table above.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 106 Polaris off-road models, including the RZR. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian and Polaris models, not an aftermarket copy.
Should I replace gaskets at the same time?
Yes. Replace any gasket or seal you disturb; they are on the same parts diagram.
Are Indian engine parts still available?
Yes. Indian is still in production, and Witchdoctors stocks genuine engine parts for current and older models. Order wear items like gaskets and seals with the main part.
Can I do this myself?
Experienced home mechanics can with the service manual and the right tools. Internal work needing precise measurement is best done by a qualified technician.
Order Your Genuine Indian & Polaris Valve Spring Today
Keep your Indian motorcycle or Polaris off-road vehicle on the road. Add the genuine Indian & Polaris Valve Spring (part #7045027) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.