Indian VCM Gen2 Unprogrammed V4 4080517

Genuine Indian VCM Gen2 Unprogrammed V4 — OEM Part #4080517

Indian electrical systems are built around exact connectors and circuits. The genuine Indian VCM Gen2 Unprogrammed V4 (part #4080517) plugs straight into the Indian Challenger, Challenger Dark Horse and other models with no splicing.

The electrical system powers ignition, fuel injection, lighting and accessories. Bad connections or failed modules cause no-starts and strange faults. This part is confirmed for 13 Indian models from 2024. See the full fitment list below.

Indian VCM Gen2 Unprogrammed V4 at a Glance

• OEM part number: 4080517
• Brand: Indian Motorcycle (genuine OEM part)
• Part type: Control Module
• Fits: Indian Challenger and Pursuit and Chief Cruiser models, 2024
• Condition: New

Indian Models and Years This VCM Gen2 Unprogrammed V4 Fits

Genuine Indian part #4080517 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.

Indian Challenger and Pursuit Fitment

Indian Chief Cruiser Fitment

Why Choose a Genuine Indian OEM VCM Gen2 Unprogrammed V4?

• Plug-and-play connectors for the factory harness
• Correct circuits and resistance values
• Reliable starts and charging
• Avoids the problems of universal wiring
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing

Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.

Features and Materials

Key Features

• Genuine Indian Motorcycle OEM part #4080517
• Factory connectors and routing
• Weather-sealed terminals
• Direct replacement for the listed models

Materials and Construction

Indian electrical parts use automotive-grade copper wire, sealed connectors, heat-resistant insulation and molded switch housings.

Common Reasons Riders Replace This Part

• Fixing no-start or intermittent electrical faults
• Replacing chafed or melted wiring
• Replacing failed switches, sensors or modules
• Repairs after a tip-over or water damage

Signs Your VCM Gen2 Unprogrammed V4 Needs Replacing

• No start or intermittent power
• Blown fuses or dead circuits
• Warning lights on the dash
• Melted or corroded connectors

Installation Tips

1. Disconnect the battery negative cable first.
2. Photograph the routing of the old part before removing it.
3. Install the new part, matching the original routing and clips.
4. Apply dielectric grease to connectors to keep out moisture.
5. Reconnect the battery and test the circuit before riding.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Indian Parts Diagrams for This Part

Browse all Indian motorcycle parts diagrams to find part #4080517 for your model.

Related Indian OEM Parts

Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:

• Indian WCM Gen1 Programmed V4 433Mhz (#2417227)
• Indian Ecm Mount Anti Vibration Foam (#5522319)
• Indian WCM Gen1 Programmed V4 315Mhz (#2417572)
• Indian WCM Gen1 Programmed 433Mhz (#2416265)
• Indian Power Supply Module, Unprogrammed, 4CH (#4017737)
• Indian Wcm Gen1 Unprogrammed 315Mhz (Dealer Install Required) (#4019825)

Recommended Accessories and Maintenance Supplies

Pair your VCM Gen2 Unprogrammed V4 with these parts and supplies:

• BS Battery for Indian — Sealed AGM and lithium batteries
• Indian stators and regulators — Stators, rectifiers, regulators and sensors
• Indian ignition parts — Coils, plug wires and ignition parts
• NGK spark plugs — Spark plugs for Indian V-twins
• Indian OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Victory & Indian Motorcycle Maintenance Checklist
• How to Prepare Your Motorcycle for Winter Storage.
• Can You Ride a Motorcycle in The Rain?
• Tips for Riding Your Motorcycle in the Fall.

Frequently Asked Questions

What is the OEM part number for this Indian VCM Gen2 Unprogrammed V4?

The genuine Indian Motorcycle part number is 4080517. Use it to match this part to your factory parts diagram.

Which Indian models does part #4080517 fit?

It fits the Indian Challenger (2024); Indian Challenger Dark Horse (2024); Indian Challenger Elite (2024); Indian Challenger Limited (2024); Indian Chief 111 (2024); Indian Chief Bobber 111 (2024); Indian Chief Bobber Dark Horse 116 (2024); Indian Chief Dark Horse 116 (2024); Indian Pursuit Dark Horse (2024); Indian Pursuit Limited (2024); Indian Sport Chief 116 (2024); Indian Super Chief 111 (2024); Indian Super Chief Limited 116 (2024).

Is this a genuine Indian Motorcycle part?

Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.

How do I make sure this fits my bike?

Match part #4080517 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.

Do I need to program a new module?

Some control modules and keys need setup with a dealer tool. Check the service manual for your model.

How do I find an electrical fault?

Check the battery, fuses and grounds first, then use the wiring diagram in the service manual.

Does this include connectors?

OEM harness parts include the factory connectors shown in the parts diagram.

Order Your Genuine Indian VCM Gen2 Unprogrammed V4 Today

Ride with confidence on parts made for your bike. Order the genuine Indian VCM Gen2 Unprogrammed V4, OEM part #4080517, from Witchdoctors today and keep your Indian Challenger, Challenger Dark Horse and other models running the way Indian designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Chief Joseph Scenic Byway (WY-296) — northwest Wyoming: switchbacks over Dead Indian Pass toward Yellowstone
• Natchez Trace Parkway — Mississippi, Alabama and Tennessee: 444 miles of low-traffic, history-filled parkway