Genuine Victory & Polaris Flat Washer Victory Hammer 2005-2007 — OEM Part #7556337
Stop with confidence with a genuine Victory & Polaris Flat Washer Victory Hammer 2005-2007. Built for the Victory Hammer, it fits the factory calipers, lines and mounts so lever and pedal feel return to factory standard.
Calipers, master cylinders, lines, pads, rotors and ABS parts work as one hydraulic system. A worn or wrong part leads to a soft lever, noise or brake failure. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.
Flat Washer Victory Hammer 2005-2007 at a Glance
-
OEM part number: 7556337
-
Brand: Victory & Polaris (genuine Polaris-made OEM part)
-
Part type: Brake Hardware
-
Victory fitment: Hammer, 2005–2007
-
Polaris off-road fitment: Ranger and Xpedition, 2022–2026
-
Condition: New
Models and Years This Flat Washer Victory Hammer 2005-2007 Fits
Genuine part #7556337 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Victory Motorcycle Fitment
| Model |
Model Years |
| Victory Hammer |
2005–2007 |
Polaris Off-Road Vehicle Fitment
18 Polaris model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Polaris Ranger |
2022–2023 |
12 |
| Polaris Xpedition |
2024–2026 |
6 |
Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.
Why Choose a Genuine Victory & Polaris OEM Flat Washer Victory Hammer 2005-2007?
- Factory hydraulic specification and feel
- Direct fit with original calipers, lines and mounts
- Compatible with Victory ABS where equipped
- Restores safe, predictable stopping
- Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years
Features and Materials
Key Features
- Genuine Victory & Polaris OEM brake part, part #7556337
- Original fittings, banjo bolts and mounting
- Built to Victory's brake specification
- Designed for the listed Victory & Polaris models
- Works with the DOT fluid in your manual
Materials and Construction
Victory brake parts use steel rotors, sintered or organic pads, aluminum calipers and master cylinders with DOT-compatible seals, and reinforced or braided brake lines.
Common Reasons Riders Replace This Part
- Fixing a soft or spongy lever or pedal
- Replacing leaking calipers, lines or master cylinders
- Replacing worn pads or warped rotors
- Repairing ABS wheel speed sensors and rings
Signs Your Flat Washer Victory Hammer 2005-2007 Needs Replacing
- Spongy lever or pedal
- Squealing, grinding or pulsing
- Fluid leaks or dark fluid
- Rotors below minimum thickness
- ABS warning light
Installation Tips
- Use the Victory parts diagram to confirm fittings and crush washers.
- Protect paint from brake fluid and cap open lines.
- Torque banjo bolts and caliper bolts to spec with new washers.
- Refill with fresh DOT fluid and bleed fully (ABS models may need a specific procedure).
- Test at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #7556337 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Flat Washer Victory Hammer 2005-2007 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory & Polaris Flat Washer Victory Hammer 2005-2007?
The genuine part number is 7556337. Use it to match this part to your factory parts diagram.
Which Victory motorcycles does part #7556337 fit?
It fits the Victory Hammer (2005–2007).
Does part #7556337 fit Indian motorcycles?
Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.
Does it fit Polaris ATVs or side-by-sides?
Yes. The same part number is used on 18 Polaris off-road models, including the Ranger and Xpedition. See the Polaris table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type on the reservoir cap and in your manual. Never mix silicone DOT 5 with DOT 4.
Why is my ABS light on?
A failed wheel speed sensor is a common cause. Our blog covers diagnosis.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Order Your Genuine Victory & Polaris Flat Washer Victory Hammer 2005-2007 Today
Victory parts get harder to find every year. Order the genuine Victory & Polaris Flat Washer Victory Hammer 2005-2007, OEM part #7556337, from Witchdoctors today and keep your Victory Hammer running the way it was built.
Where to Ride Your Victory
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.