Genuine Indian Wheel Balance Weight, 7G Slv — OEM Part #1522981
Roll on factory-spec parts with a genuine Indian Wheel Balance Weight, 7G Slv. Built for the Indian motorcycle, it keeps the original wheel alignment, speedometer and ABS readings correct.
Wheels, axles, spacers, bearings and seals keep the wheels true and turning smoothly. Wear shows up as wobble, noise or uneven tire wear. This part is confirmed for 15 Indian models from 2018 to 2022.
Wheel Balance Weight, 7G Slv at a Glance
-
OEM part number: 1522981
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: Wheel Balancing
-
Indian fitment: Chief, Chieftain, Elite, Roadmaster and Springfield, 2018–2022
-
Condition: New
Models and Years This Wheel Balance Weight, 7G Slv Fits
Genuine part #1522981 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian Chief Classic |
2018 |
| Indian Chief Vintage |
2018–2020 |
| Indian Chief Vintage Premium 111 |
2021 |
| Indian Chief Vintage Premium 116 |
2021 |
| Indian Chieftain Classic |
2018–2020 |
| Indian Elite |
2019 |
| Indian Roadmaster |
2018–2019, 2022 |
| Indian Roadmaster Classic |
2018 |
| Indian Roadmaster Elite |
2018–2019 |
| Indian Roadmaster Premium |
2020, 2022 |
| Indian Springfield |
2018–2019 |
| Indian Springfield 111 |
2022 |
| Indian Springfield 116 |
2022 |
| Indian Springfield Dark Horse |
2022 |
| Indian Springfield Limited |
2020 |
Why Choose a Genuine Indian OEM Wheel Balance Weight, 7G Slv?
- Factory size, offset and alignment
- Correct bearing and spacer fit
- Keeps ABS and speedometer readings right
- Matches the factory finish
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM wheel or axle part, part #1522981
- Original dimensions and fitment
- Factory finish where applicable
- Designed for the listed Indian models
- Works with original rotors, pulleys and sensors
Materials and Construction
Indian wheels are cast aluminum with painted, machined or chrome finishes; axles and spacers are hardened steel; bearings are sealed steel units.
Common Reasons Riders Replace This Part
- Replacing a bent or cracked wheel
- Replacing worn bearings and seals
- Replacing a damaged axle or spacer
- Restoring factory wheels after aftermarket ones
Signs Your Wheel Balance Weight, 7G Slv Needs Replacing
- Wobble or vibration at speed
- Grinding or roughness when spinning the wheel
- Play in the wheel when rocked
- Bent rim or cracked spokes
- Uneven tire wear
Installation Tips
- Support the bike so the wheel is off the ground.
- Follow the Indian service manual for axle torque and spacer order.
- Install bearings with the correct driver, never on the inner race.
- Check belt alignment (rear) and ABS sensor gap after installation.
- Torque the axle and pinch bolts and test-ride gently.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #1522981 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Wheel Balance Weight, 7G Slv with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Wheel Balance Weight, 7G Slv?
The genuine part number is 1522981. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #1522981 fit?
It fits 15 Indian models (Chief, Chieftain, Elite, Roadmaster and Springfield) from 2018 to 2022. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
Should I replace both wheel bearings?
Yes. Replace bearings and seals in pairs.
Will the ABS work with this wheel?
Factory wheels for ABS models carry the correct tone ring. Match the part number for your model.
What tire pressure should I run?
Use the pressures on your bike's label and in the owner's manual.
Order Your Genuine Indian Wheel Balance Weight, 7G Slv Today
Keep your Indian motorcycle on the road. Add the genuine Indian Wheel Balance Weight, 7G Slv (part #1522981) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.