Victory Front Axle Bolt 7517936

Genuine Victory Front Axle Bolt — OEM Part #7517936

Roll on factory-spec parts with a genuine Victory Front Axle Bolt. Built for the Victory motorcycle, it keeps the original wheel alignment, speedometer and ABS readings correct.

Wheels, axles, spacers, bearings and seals keep the wheels true and turning smoothly. Wear shows up as wobble, noise or uneven tire wear. This part is confirmed for 10 Victory models from 2002 to 2015.

Front Axle Bolt at a Glance

• OEM part number: 7517936
• Brand: Victory (genuine Polaris-made OEM part)
• Part type: Axles & Axle Adjusters
• Victory fitment: Boardwalk, Hammer, Highball, Jackpot, Kingpin, V92 and Vegas, 2002–2015
• Condition: New

Models and Years This Front Axle Bolt Fits

Genuine part #7517936 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Victory Motorcycle Fitment

Why Choose a Genuine Victory OEM Front Axle Bolt?

• Factory size, offset and alignment
• Correct bearing and spacer fit
• Keeps ABS and speedometer readings right
• Matches the factory finish
• Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years

Features and Materials

Key Features

• Genuine Victory OEM wheel or axle part, part #7517936
• Original dimensions and fitment
• Factory finish where applicable
• Designed for the listed Victory models
• Works with original rotors, pulleys and sensors

Materials and Construction

Victory wheels are cast aluminum with painted, machined or chrome finishes; axles and spacers are hardened steel; bearings are sealed steel units.

Common Reasons Riders Replace This Part

• Replacing a bent or cracked wheel
• Replacing worn bearings and seals
• Replacing a damaged axle or spacer
• Restoring factory wheels after aftermarket ones

Signs Your Front Axle Bolt Needs Replacing

• Wobble or vibration at speed
• Grinding or roughness when spinning the wheel
• Play in the wheel when rocked
• Bent rim or cracked spokes
• Uneven tire wear

Installation Tips

1. Support the bike so the wheel is off the ground.
2. Follow the Victory service manual for axle torque and spacer order.
3. Install bearings with the correct driver, never on the inner race.
4. Check belt alignment (rear) and ABS sensor gap after installation.
5. Torque the axle and pinch bolts and test-ride gently.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #7517936 and every part installed with it in the factory parts diagrams for your model:

• 2015 Victory Vegas parts diagrams
• 2014 Victory Highball parts diagrams
• 2014 Victory Jackpot parts diagrams
• 2013 Victory Boardwalk parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Victory Speed Sensor (#4011884-WD)
• Victory Rear Wheel Bearing Spacer, Right (#5631581)
• Victory Front Wheel Bearing Spacer, Left (#5631481)
• Victory Front Wheel Bearing Spacer, Mid (#5335681)
• Victory Wheel Bearing Spacer, Left (#5631479)
• Victory Wheel Speed Sensor (#4011884)

Recommended Accessories and Maintenance Supplies

Pair your Front Axle Bolt with these parts and supplies:

• Wheel bearings, seals and axles — Bearings and axles
• Victory and Indian tires — Tires
• Valve stem caps — Valve caps
• Balancing beads and sealer — Wheel balancing
• Victory OEM parts diagrams — find every factory part for your bike

Helpful Guides from the Witchdoctors Blog

• Motorcycle Tire Performance and Tire Pressure
• Radial vs Bias Ply Motorcycle Tires-Understanding the Difference
• Expert Guide To Victory Motorcycle Wheel Speed Sensors
• Victory OEM Parts vs Aftermarket Parts: Which Is Right?

Frequently Asked Questions

What is the OEM part number for this Victory Front Axle Bolt?

The genuine part number is 7517936. Use it to match this part to your factory parts diagram.

Which Victory motorcycles does part #7517936 fit?

It fits 10 Victory models (Boardwalk, Hammer, Highball, Jackpot, Kingpin, V92 and Vegas) from 2002 to 2015. See the Victory fitment table above.

Does part #7517936 fit Indian motorcycles?

Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.

Should I replace both wheel bearings?

Yes. Replace bearings and seals in pairs.

Will the ABS work with this wheel?

Factory wheels for ABS models carry the correct tone ring. Match the part number for your model.

What tire pressure should I run?

Use the pressures on your bike's label and in the owner's manual.

Order Your Genuine Victory Front Axle Bolt Today

Victory parts get harder to find every year. Order the genuine Victory Front Axle Bolt, OEM part #7517936, from Witchdoctors today and keep your Victory motorcycle running the way it was built.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts

Where to Ride Your Victory

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Peak to Peak Scenic Byway — Colorado Front Range: high-country views from Estes Park to Black Hawk
• Beartooth Highway — Montana & Wyoming: switchbacks to nearly 11,000 feet near Yellowstone