Genuine Polaris Steering Wheel Cap — OEM Part #5450255-747
Loose, heavy or wandering steering makes every ride tiring and less safe. The genuine Polaris Steering Wheel Cap restores precise, factory-feel steering on your Polaris ATV or side-by-side, fitting the original column, rack and linkage.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 47 Polaris models from 2020 to 2023. See the full fitment list below.
Steering Wheel Cap at a Glance
-
OEM part number: 5450255-747
-
Brand: Polaris (genuine factory part)
-
Part type: Steering Wheel Cap
-
Fits: General crossover side-by-side and RZR sport side-by-side models, 2020–2023
-
Condition: New
Polaris Models and Years This Steering Wheel Cap Fits
Genuine Polaris part #5450255-747 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 47 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2021–2023 |
12 |
| Polaris General XP |
2021–2023 |
22 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR 1000 |
2020 |
1 |
| Polaris RZR XP |
2020, 2023 |
12 |
Why Choose a Genuine Polaris OEM Steering Wheel Cap?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Polaris EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM steering part, part #5450255-747
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Polaris models
- Works with factory power steering units, sensors and wiring where applicable
Materials and Construction
Polaris steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed power steering motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing power steering faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Steering Wheel Cap Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a power steering warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Polaris parts diagram for hardware, cotter pins and power steering connectors.
- Disconnect the battery before working on power steering parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5450255-747 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Steering Wheel Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Steering Wheel Cap?
The genuine Polaris part number is 5450255-747. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5450255-747 fit?
It fits 47 Polaris General and RZR models from 2020 to 2023. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does power steering need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Polaris Steering Wheel Cap Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Steering Wheel Cap (part #5450255-747) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.