Badge

Victory Resistor 68 Ohm Mini 4013062

Price
$54.99 USD
Normally Ships in 5-7 Business Days

Inventory:

Loading..
SKU: 4013062
In stock and ready for shipping

SKU: 4013062

Genuine Victory Resistor 68 Ohm Mini — OEM Part #4013062

Fix electrical gremlins the right way with the genuine Victory Victory Resistor 68 Ohm Mini, Polaris part #4013062. It is the factory electrical part for the Victory Hammer, High-Ball and other models.

The electrical system powers ignition, fuel injection, lighting and accessories. Bad connections or failed modules cause no-starts and strange faults. This part is confirmed for 9 Victory models from 2013 to 2017. See the full fitment list below.

Victory Resistor 68 Ohm Mini at a Glance

  • OEM part number: 4013062
  • Brand: Victory Motorcycles (genuine Polaris OEM part)
  • Part type: Resistors & Diodes
  • Fits: Victory Bagger and Touring, Cruiser and Octane models, 2013–2017
  • Condition: New

Victory Models and Years This Resistor 68 Ohm Mini Fits

Genuine Victory part #4013062 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Bagger and Touring Fitment

Model Model Years
Victory Cross Country 2015–2016

Victory Cruiser Fitment

Model Model Years
Victory Boardwalk 2013–2015
Victory Hammer 2013–2017
Victory High-Ball 2013–2017
Victory Jackpot 2013–2016
Victory Judge 2013–2017
Victory Vegas 2013–2017
Victory Gunner 2015–2017

Victory Octane Fitment

Model Model Years
Victory Octane 2017

Also Fits These Indian Motorcycle Models

Polaris shared this part number with select Indian motorcycles: Indian Scout (2015–2016, 2023–2024); Indian Scout 1200 (2017–2022); Indian Scout 1200 Anniversary (2020); Indian Scout Bobber (2018–2024); Indian Scout Bobber Sixty (2020–2024); Indian Scout Bobber Twenty (2020–2024); Indian Scout Rogue (2022–2024); Indian Scout Rogue Sixty (2022–2024); Indian Scout Sixty (2016–2024).

Also Used on These Polaris Models

This hardware is also used on 82 Polaris models, including POLARIS INTL RANGER 902D EU TRACTOR APLA (2021); POLARIS INTL RANGER 902D EU/ISRL TRACTOR (2020); POLARIS INTL RANGER 902D EU/TRACTOR (2020); POLARIS INTL RANGER 902D ISRL TRACTOR (2021–2022); POLARIS INTL RANGER CREW EPS (2020); POLARIS INTL RANGER CREW EPS EU (2019); POLARIS INTL RANGER DIESEL HD TRACTOR EPS EU/APLA (2022); POLARIS RANGER CREW 1000 EPS (2018); POLARIS RANGER CREW EPS (2019–2020); POLARIS RANGER CREW EPS NORTHSTAR (2019–2020); POLARIS RANGER CREW EPS NORTHSTAR RC (2020); POLARIS RANGER CREW NORTHSTAR FC (2020); POLARIS RANGER CREW NORTHSTAR PREMIUM (2020); POLARIS RANGER CREW NORTHSTAR ULTIMATE (2020); POLARIS RANGER CREW NORTHSTAR ULTIMATE AUDIO (2020); POLARIS RANGER CREW XP 1000 NORTHSTAR (2019, 2021–2022); POLARIS RANGER CREW XP 1000 NORTHSTAR FACTORY CHOICE (2019); POLARIS RANGER CREW XP 1000 NORTHSTAR RC (2019); POLARIS RANGER CREW XP 1000 NORTHSTAR ULTIMATE (2022); POLARIS RANGER CREW XP 1000 NORTHSTAR ULTIMATE BIG GAME (2022); POLARIS RANGER CREW XP 1000 NORTHSTAR ULTIMATE TRAIL BOSS EVAP (2022); POLARIS RANGER EPS NORTHSTAR (2019–2020); POLARIS RANGER EPS NORTHSTAR RC (2019–2020); POLARIS RANGER NORTHSTAR FC (2020); POLARIS RANGER NORTHSTAR ULTIMATE (2020); POLARIS RANGER NORTHSTAR ULTIMATE AUDIO (2020); POLARIS RANGER PREMIUM NORTHSTAR (2020); POLARIS RANGER XP 1000 NORTHSTAR EVAP (2022); POLARIS RANGER XP 1000 NORTHSTAR FACTORY CHOICE (2019); POLARIS RANGER XP 1000 NORTHSTAR ULTIMATE EVAP (2022); POLARIS RANGER XP 1000 NORTHSTAR ULTIMATE TRAIL BOSS (2022); POLARIS RANGER XP 1000 PS NORTHSTAR (2021); POLARIS XPEDITION XP5 NORTHSTAR (2024–2026); Polaris INTL RANGER DIESEL HD EPS AUS (2026); Polaris INTL RANGER DIESEL HD EPS DLX EU/TRACTOR (2026); Polaris INTL RANGER DIESEL HD EPS DLX EU/TRACTOR/AU (2023–2025); Polaris INTL RANGER DIESEL HD EPS IS (2026); Polaris INTL RANGER DIESEL HD EPS ISRAEL (2023–2025); Polaris RANGER 1000 XP CREW NORTHSTAR (2024); Polaris RANGER 1000 XP CREW NORTHSTAR ULTIMATE TRAIL BOSS (2024–2025); and more.

Why Choose a Genuine Victory OEM Resistor 68 Ohm Mini?

  • Plug-and-play connectors for the factory harness
  • Correct circuits and resistance values
  • Reliable starts and charging
  • Avoids the problems of universal wiring
  • Made to the same specifications as the part installed at the factory, not an aftermarket copy
  • Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

  • Genuine Polaris/Victory OEM part #4013062
  • Factory connectors and routing
  • Weather-sealed terminals
  • Direct replacement for the listed models

Materials and Construction

Victory electrical parts use automotive-grade copper wire, sealed connectors, heat-resistant insulation and molded switch housings.

Common Reasons Riders Replace This Part

  • Fixing no-start or intermittent electrical faults
  • Replacing chafed or melted wiring
  • Replacing failed switches, sensors or modules
  • Repairs after a tip-over or water damage

Signs Your Resistor 68 Ohm Mini Needs Replacing

  • No start or intermittent power
  • Blown fuses or dead circuits
  • Warning lights on the dash
  • Melted or corroded connectors

Installation Tips

  1. Disconnect the battery negative cable first.
  2. Photograph the routing of the old part before removing it.
  3. Install the new part, matching the original routing and clips.
  4. Apply dielectric grease to connectors to keep out moisture.
  5. Reconnect the battery and test the circuit before riding.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #4013062 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Resistor 68 Ohm Mini with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Victory Resistor 68 Ohm Mini?

The genuine Polaris/Victory part number is 4013062. Use it to match this part to your factory parts diagram.

Which Victory models does part #4013062 fit?

It fits the Boardwalk (2013–2015); Hammer (2013–2017); High-Ball (2013–2017); Jackpot (2013–2016); Judge (2013–2017); Vegas (2013–2017); Cross Country (2015–2016); Gunner (2015–2017); Octane (2017).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

Do I need to program a new module?

Some control modules and keys need setup with a dealer tool. Check the service manual for your model.

How do I find an electrical fault?

Check the battery, fuses and grounds first, then use the wiring diagram in the service manual.

Does this include connectors?

OEM harness parts include the factory connectors shown in the parts diagram.

Order Your Genuine Victory Resistor 68 Ohm Mini Today

Ride with confidence on parts made for your bike. Order the genuine Victory Resistor 68 Ohm Mini, OEM part #4013062, from Witchdoctors today and keep your Victory Hammer, High-Ball and other models running the way Victory designed it.

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 business days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: