Genuine Indian Gear Indicator Switch — OEM Part #4019453
Put the power down smoothly with a genuine Indian Gear Indicator Switch. Built for the Indian motorcycle, it matches the original splines, gear sizes and mounting, so it works with the rest of the driveline.
The clutch, primary, six-speed transmission, shifter, pulleys and drive belt carry every bit of engine torque to the rear wheel. This part is confirmed for 31 Indian models from 2019 to 2026.
Gear Indicator Switch at a Glance
-
OEM part number: 4019453
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: Gear Position Sensor
-
Indian fitment: 101 Scout, FTR, Scout, Sport and Super, 2019–2026
-
Condition: New
Models and Years This Gear Indicator Switch Fits
Genuine part #4019453 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian 101 Scout |
2025–2026 |
| Indian FTR |
2023–2024 |
| Indian FTR 1200 |
2019–2020, 2022 |
| Indian FTR 1200 Carbon |
2022 |
| Indian FTR 1200 Carbon LE |
2020 |
| Indian FTR 1200 Rally |
2020, 2022 |
| Indian FTR 1200 Rally LE |
2019 |
| Indian FTR 1200 S |
2019 |
| Indian FTR R Carbon |
2023–2024 |
| Indian FTR Rally |
2023–2024 |
| Indian FTR Sport |
2023–2024 |
| Indian FTR X 1 R Carbon |
2024 |
| Indian FTR X 100% R Carbon |
2024 |
| Indian FTR X Rsd Super Hooligan |
2024 |
| Indian Scout |
2023–2024 |
| Indian Scout 1200 |
2020, 2022 |
| Indian Scout 1200 Anniversary |
2020 |
| Indian Scout Bobber |
2020, 2022–2026 |
| Indian Scout Bobber 125TH Anniversary Edition |
2026 |
| Indian Scout Bobber Sixty |
2020, 2022–2024 |
| Indian Scout Bobber Twenty |
2020, 2022–2024 |
| Indian Scout Classic |
2025–2026 |
| Indian Scout Rogue |
2022–2024 |
| Indian Scout Rogue Sixty |
2022–2024 |
| Indian Scout Sixty |
2020, 2022–2024 |
| Indian Scout Sixty Bobber |
2025–2026 |
| Indian Scout Sixty Classic |
2025–2026 |
| Indian Sport Scout |
2025–2026 |
| Indian Sport Scout Rt |
2026 |
| Indian Sport Scout Sixty |
2025–2026 |
| Indian Super Scout |
2025–2026 |
Why Choose a Genuine Indian OEM Gear Indicator Switch?
- Exact gear, spline and bearing fit
- Restores smooth clutch engagement and shifting
- Correct belt alignment and tension
- Built for full Indian V-twin torque
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM driveline part, part #4019453
- Machined to Indian's original specification
- Hardened surfaces where applicable
- Designed for the listed Indian models
- Works with factory belts, pulleys and clutch parts
Materials and Construction
Indian driveline parts use heat-treated steel gears, shafts and shift forks, friction and steel clutch plates, aluminum pulleys and covers, and carbon-fiber-reinforced drive belts.
Common Reasons Riders Replace This Part
- Fixing clutch slip or a heavy clutch pull
- Repairing missed shifts or false neutrals
- Replacing a worn or damaged belt or pulley
- Rebuilding the transmission
Signs Your Gear Indicator Switch Needs Replacing
- Clutch slipping under load
- Hard shifting or false neutrals
- Clunking or whining from the transmission
- Frayed, cracked or noisy drive belt
- Worn or damaged pulley teeth
Installation Tips
- Follow the Indian service manual for clutch, transmission and belt procedures.
- Replace gaskets and seals you disturb.
- Set belt tension and alignment with the correct gauge.
- Adjust clutch free play to spec.
- Test-ride gently and recheck belt tension after a few miles.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #4019453 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Gear Indicator Switch with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Gear Indicator Switch?
The genuine part number is 4019453. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #4019453 fit?
It fits 31 Indian models (101 Scout, FTR, Scout, Sport and Super) from 2019 to 2026. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
How do I check belt tension?
Use a belt tension gauge at the spec in your manual. Our blog covers belt checks step by step.
Should I replace both pulleys with a new belt?
Inspect the teeth. Worn or damaged pulleys will chew up a new belt.
What causes false neutrals?
Worn shift forks or detent parts, or a misadjusted shifter linkage.
Order Your Genuine Indian Gear Indicator Switch Today
Keep your Indian motorcycle on the road. Add the genuine Indian Gear Indicator Switch (part #4019453) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.